Excellent

Silicone jewelry molds

66 products


    • Ordered before 11:30 PM , delivered tomorrow
    • More than 5 years of experience in the field of epoxy art
    • Free expert advice
    • Ordered before 11:30 PM , delivered tomorrow
    • More than 5 years of experience in the field of epoxy art
    • Free expert advice
    • Ordered before 11:30 PM , delivered tomorrow
    • More than 5 years of experience in the field of epoxy art
    • Free expert advice
  • Sale -61% Siliconen Mal Druppel Oorbellen - #itsokay#

    Silicone Mold Drop Earrings

    Silicone mold for making drop-shaped pendants or earrings With these beautiful pendants you can also make super cool jewelry. Pour epoxy resin into the mold and add food coloring, glitter for crafts , teeth, dried real flowers or whatever you like. Let it harden thoroughly. Then take a suede lace of your choice and tie it to it and you have a beautiful necklace! Mold dimensions: 6 cm diameter Mold contents: approximately 2-3 grams per charm. Want to make a necklace/pendant or earring? See: - Wax cord necklaces - metal rings - screw eyes - brass lobster clasps - ear hooks Need epoxy? The use of suitable epoxy is important for the end result of your Resin Art art. We have two types of epoxy resins, both of which have advantages and disadvantages. 1 . Do you want to use epoxy that is very easy to process? Then choose our UV Resin . This epoxy is ready to use and hardens within a few minutes using UV light. You let this resin dry in direct sunlight or under a UV lamp. 2 . You can also choose the Epoxy casting resin 1:1 or UltraEpoxy , these epoxy resins are very easy to use and suitable for larger surfaces. Make your Resin Art unique with these pigments You can give your Resin Art a unique twist with special color pigments. Achieve a full opaque color with shimmer, go for transparent pigment or pigment paste. Quickly view all color pigments especially for Resin Art.

    4,951,95

    Morgen bezorgd
  • Sale -36% Siliconen Armbanden Mal - #itsokay#

    Silicone Mold Bracelet

    With this silicone mold you can make a nice smooth thin bracelet There are three sizes with different diameters. This is measured on the inside of the mold. Please note that the bracelet has no opening, so keep in mind that it has to go over your hand. The molds are reusable, there is a special layer in them that does wear off with use. The molds are not suitable for the oven or microwave. Mold dimensions: 60, 70 or 80 mm Mold contents: approximately 25 grams Need epoxy? The use of suitable epoxy is important for the end result of your Resin Art art. We recommend using Epoxy casting resin 1:1 or UltraEpoxy for these types of molds. These epoxy resins are very easy to use and suitable for larger surfaces. Make your Resin Art unique with these pigments You can give your Resin Art a unique twist with special color pigments. Achieve a full opaque color with shimmer, go for transparent pigment or pigment paste. Quickly view all color pigments especially for Resin Art.

    6,954,45

    Morgen bezorgd
  • Siliconen mal Cuff armband - #itsokay#

    Silicone Mold Cuff Bracelet

    With this silicone mold you can make a beautiful cuff bracelet. Pour epoxy into the mold and add food coloring, dried flowers , gold foil or other decorations. This mold is made of high quality silicone. The mold is not suitable for the oven or microwave. Made of flexible silicone, so it is easy to use and can be reused multiple times. Mold dimensions: 8.5 cm wide and 3.5 cm high. The bracelet you make has approximately a diameter of 6.3 cm, which fits around the wrist. Mold contents: approximately 50 grams Need epoxy? The use of suitable epoxy is important for the end result of your Resin Art art. We recommend using Epoxy casting resin 1:1 or UltraEpoxy for these types of molds. These epoxy resins are very easy to use and suitable for larger surfaces. Make your Resin Art unique with these pigments You can give your Resin Art a unique twist with special color pigments. Achieve a full opaque color with shimmer, go for transparent pigment or pigment paste. Quickly view all color pigments especially for Resin Art.

    5,95

    Morgen bezorgd

  • Sale -38% Siliconen mal met 8 ringmaten (Plat zijprofiel) - #itsokay#

    Silicone mold with 8 ring sizes (Flat side profile)

    Silicone mold rings that allow you to make epoxy resin rings in 8 different sizes. This handy mold solves all ring sizing problems as you are sure to find a suitable size to fit the wearer's finger. The side profile of the ring is straight flat (not curved), with a width of approximately 6mm. Click here for a mold that you can use to make rings with a curved side profile. Ring inner diameters: 15mm, 16mm, 17mm, 18mm, 19mm, 20mm, 21mm, 22mm Mold contents: approximately 5 grams of resin per ring. Made of flexible silicone, so it is easy to use and can be reused multiple times. Cannot be put in the oven or dishwasher. Need epoxy? The use of suitable epoxy is important for the end result of your Resin Art art. We have two types of epoxy resins, both of which have advantages and disadvantages. 1 . Do you want to use epoxy that is very easy to process? Then choose our UV Resin . This epoxy is ready to use and hardens within a few minutes using UV light. You let this resin dry in direct sunlight or under a UV lamp. 2 . You can also choose the Epoxy casting resin 1:1 or UltraEpoxy , these epoxy resins are very easy to use and suitable for larger surfaces. Make your Resin Art unique with these pigments You can give your Resin Art a unique twist with special color pigments. Achieve a full opaque color with shimmer, go for transparent pigment or pigment paste. Quickly view all color pigments especially for Resin Art.

    7,954,95

    Morgen bezorgd

  • Last stock! Siliconen mal met 14 ringmaten (Gebogen zijprofiel) - #itsokay#

    Silicone mold with 14 ring sizes (Curved side profile)

    Silicone mold that allows you to make resin rings in 14 different sizes. This handy mold solves all ring sizing problems as you are sure to find a suitable size to fit the wearer's finger. The side profile of the ring is curved , with a width of approximately 6 mm. Click here for a mold that you can use to make flat rings. Ring inner diameters: 17mm to 23mm Mold contents: approximately 1-2 grams of resin per ring Made of flexible silicone, so it is easy to use and can be reused multiple times. Cannot be put in the oven or dishwasher. Need epoxy? The use of suitable epoxy is important for the end result of your Resin Art art. We have two types of epoxy resins, both of which have advantages and disadvantages. 1 . Do you want to use epoxy that is very easy to process? Then choose our UV Resin . This epoxy is ready to use and hardens within a few minutes using UV light. You let this resin dry in direct sunlight or under a UV lamp. 2 . You can also choose the Epoxy casting resin 1:1 or UltraEpoxy , these epoxy resins are very easy to use and suitable for larger surfaces. Make your Resin Art unique with these pigments You can give your Resin Art a unique twist with special color pigments. Achieve a full opaque color with shimmer, go for transparent pigment or pigment paste. Quickly view all color pigments especially for Resin Art.

    5,95

    Morgen bezorgd

  • Siliconen Mal Voor 10 Grote Hangers - #itsokay#

    Silicone mold large pendants

    Silicone mold for making 10 large pendants. The pendants have different sizes. Pour epoxy resin into the mold and add food coloring and dried flowers or other things you like. The mold is not suitable for the oven or microwave. Made of flexible silicone, so it is easy to use and can be reused multiple times. Pendant or make a chain ? The molds already have a hole and you can directly put a wire or cord through it. Want to make an earring/pendant? There are already holes in the mold. Do An metal ring in a hole and hang one here ear hook . Also see: - Ready-made necklaces - metal rings - screw eyes - brass lobster clasps - ear hooks Mold dimensions: 9.3cm wide, 16.9cm long and 1cm thick Mold content: approximately 5-7 grams per pendant Need epoxy? The use of suitable epoxy is important for the end result of your Resin Art art. We have two types of epoxy resins, both of which have advantages and disadvantages. 1 . Do you want to use epoxy that is very easy to process? Then choose our UV Resin . This epoxy is ready to use and hardens within a few minutes using UV light. You let this resin dry in direct sunlight or under a UV lamp. 2 . You can also choose the Epoxy casting resin 1:1 or UltraEpoxy , these epoxy resins are very easy to use and suitable for larger surfaces. Make your Resin Art unique with these pigments You can give your Resin Art a unique twist with special color pigments. Achieve a full opaque color with shimmer, go for transparent pigment or pigment paste. Quickly view all color pigments especially for Resin Art.

    7,95

    Morgen bezorgd

  • Sale -61%Last stock! Siliconen Mal Katten (klein) - #itsokay#

    Silicone Mold Cats & Cat Paws

    Silicone mold cats and cat paws to make cute cat heads and paws Pour epoxy into the mold and add food coloring, dried flowers , gold foil or other decorations. Are you going to make keychains? See ready-made key rings 10 pieces to make key rings. This mold is made of high quality silicone. The mold is not suitable for the oven or microwave. Made of flexible silicone, so it is easy to use and can be reused multiple times. If you prefer to make larger paws (6 cm), see here: Large cat paw mold Mold dimensions: 7.6 cm long x 4.75 cm wide and 0.8 cm deep Finished product dimensions : leg / head approximately 1 centimeter Mold contents: 2-5 grams per mould Need epoxy? The use of suitable epoxy is important for the end result of your Resin Art art. We have two types of epoxy resins, both of which have advantages and disadvantages. 1 . Do you want to use epoxy that is very easy to process? Then choose our UV Resin . This epoxy is ready to use and hardens within a few minutes using UV light. You let this resin dry in direct sunlight or under a UV lamp. 2 . You can also choose the Epoxy casting resin 1:1 or UltraEpoxy , these epoxy resins are very easy to use and suitable for larger surfaces. Make your Resin Art unique with these pigments You can give your Resin Art a unique twist with special color pigments. Achieve a full opaque color with shimmer, go for transparent pigment or pigment paste. Quickly view all color pigments especially for Resin Art.

    4,951,95

    Morgen bezorgd

  • Siliconen Mal Hartjes - #itsokay#

    Silicone Mold Hearts

    Silicone mold hearts in a large and small size for making hearts with epoxy resin. Made of flexible silicone, so it is easy to use and can be reused multiple times. Cannot be put in the oven or dishwasher. Small mold: 6.4 x 4.2 cm, depth 0.8 cm Mold contents: approx. 3 grams per heart Large mould: 17.5 x 16.0 cm, depth 0.5 cm Mold contents : approx. 10 grams per heart Need epoxy? The use of suitable epoxy is important for the end result of your Resin Art art. We have two types of epoxy resins, both of which have advantages and disadvantages. 1 . Do you want to use epoxy that is very easy to process? Then choose our UV Resin . This epoxy is ready to use and hardens within a few minutes using UV light. You let this resin dry in direct sunlight or under a UV lamp. 2 . You can also choose the Epoxy casting resin 1:1 or UltraEpoxy , these epoxy resins are very easy to use and suitable for larger surfaces. Make your Resin Art unique with these pigments You can give your Resin Art a unique twist with special color pigments. Achieve a full opaque color with shimmer, go for transparent pigment or pigment paste. Quickly view all color pigments especially for Resin Art.

    1,95

    Morgen bezorgd
  • Siliconen Mal Oorbellen - #itsokay#

    Silicone Mold Earrings

    Three types of silicone molds that you can use to make cool earrings. Pour epoxy resin into the mold and add food coloring and dried flowers or other things that you like. The mold is not suitable for the oven or microwave. Made of flexible silicone, so it is easy to use and can be reused multiple times. Mold dimensions: 12.6 cm long and 15.8 cm wide and 0.8 cm deep Pendant content: approximately 2-3 grams of resin per pendant in the mold NB! When making variant 2, you only make one earring per filling the mold. It is recommended to purchase 2 molds if you want to make the earrings in pairs. Manual: making epoxy earrings Want to make a pendant ? There are already holes in the mold. Do An metal ring in a hole and hang one here ear hook . Also see: - Ready-made necklaces - metal rings - screw eyes - brass lobster clasps - ear hooks Need epoxy? The use of suitable epoxy is important for the end result of your Resin Art art. We have two types of epoxy resins, both of which have advantages and disadvantages. 1 . Do you want to use epoxy that is very easy to process? Then choose our UV Resin . This epoxy is ready to use and hardens within a few minutes using UV light. You let this resin dry in direct sunlight or under a UV lamp. 2 . You can also choose the Epoxy casting resin 1:1 or UltraEpoxy , these epoxy resins are very easy to use and suitable for larger surfaces. Make your Resin Art unique with these pigments You can give your Resin Art a unique twist with special color pigments. Achieve a full opaque color with shimmer, go for transparent pigment or pigment paste. Quickly view all color pigments especially for Resin Art.

    6,95

    Morgen bezorgd
  • Sale -50% Siliconen Mal voor het maken van 15 hangers. - #itsokay#

    Silicone Mold Earrings (15 shapes)

    Silicone mold earrings with 15 beautiful shapes Do you want to make nice earrings? These molds already have a hole. Do one metal ring in a hole and hang one here ear hook . Pour epoxy resin into the mold and add dye here, flowers or other things that you like. The mold is not suitable for the oven or microwave.  Mold dimensions: 12.5 cm long x 9.0 cm wide x 0.7 cm deep. The pendants are approximately 2 cm Mold contents: approximately 5 grams of resin per pendant Need epoxy? The use of suitable epoxy is important for the end result of your Resin Art art. We have two types of epoxy resins, both of which have advantages and disadvantages. 1 . Do you want to use epoxy that is very easy to process? Then choose our UV Resin . This epoxy is ready to use and hardens within a few minutes using UV light. You let this resin dry in direct sunlight or under a UV lamp. 2 . You can also choose the Epoxy casting resin 1:1 or UltraEpoxy , these epoxy resins are very easy to use and suitable for larger surfaces. Make your Resin Art unique with these pigments You can give your Resin Art a unique twist with special color pigments. Achieve a full opaque color with shimmer, go for transparent pigment or pigment paste. Quickly view all color pigments especially for Resin Art.

    7,953,95

    Morgen bezorgd
  • Siliconen Mal Ronde Cabochons - #itsokay#

    Silicone Mold Cabochons

    Silicone mold with different sizes to make cabochons A cabochon is a flat appliqué that you can stick in a cabochon setting. For example in these closed round pendants for cabochons or rings for cabochons . Make your own cabochons Cabochons are totally hip! These flat backs can be used for many purposes. Stick the cabochons on a piece of jewelry or accessory and design your own jewelry. You can buy these cabochons separately somewhere, but you can also make them yourself with silicone molds . You pour epoxy into a cabochon mold and the jewelry that comes out is a kind of half round. You can stick this piece of jewelry into the frame of the pendant or ring with a little bit of glue or epoxy. Take a good look at which mold you need for your cabochons. Mold contents: 2-5 grams (different size mould) Dimensions: Mold 1: 14.3 cm x 4.4 cm (largest size 22 mm) Mold 2: 26.6 cm x 15.4 cm (largest size 33 mm) Mold 3: 26.5 cm x 16 cm (largest size 33 mm) Need epoxy? The use of suitable epoxy is important for the end result of your Resin Art art. We have two types of epoxy resins, both of which have advantages and disadvantages. 1 . Do you want to use epoxy that is very easy to process? Then choose our UV Resin . This epoxy is ready to use and hardens within a few minutes using UV light. You let this resin dry in direct sunlight or under a UV lamp. 2 . You can also choose the Epoxy casting resin 1:1 or UltraEpoxy , these epoxy resins are very easy to use and suitable for larger surfaces. Make your Resin Art unique with these pigments You can give your Resin Art a unique twist with special color pigments. Achieve a full opaque color with shimmer, go for transparent pigment or pigment paste. Quickly view all color pigments especially for Resin Art.

    7,95

    Morgen bezorgd
  • Haarclips Pakket - of Haarclips per stuk - #itsokay#

    Hair Clips Package (or hair clips per piece)

    Make your own hair clips with your own unique decorations with this set variant 1, 2 or 3 (hair clips + silicone mold). Children love it and of course adults also enjoy it. You can also order additional individual hair clips, variant 4, 5 or 6. Mold dimensions: 8 cm long x 7 cm wide Hair clip dimensions: 6 cm long x 2 cm wide Mold contents: approximately 2-5 grams of resin per hair clip Manual: Blog making hair clips with epoxy How does it work? 1. You will receive a set of luxurious (sturdy, metal) hair clips and 1 set of reusable silicone molds (no resin) if you order the hair clip set variant 1, 2 or 3. > You can also order the loose hair clips of 4.95 on this page (variant name = loose hair clips variant 1,2 or 3) 2. Add your own unique decorations to the silicone mold and fill it with UV Resin, approximately 10 grams per mold. 3. Let the UV Resin harden under a UV lamp or in direct sunlight (a few minutes). 4. Wear homemade silicone hair clips with pride! Need epoxy? The use of suitable epoxy is important for the end result of your Resin Art art. We have two types of epoxy resins, both of which have advantages and disadvantages. 1 . Do you want to use epoxy that is very easy to process? Then choose our UV Resin . This epoxy is ready to use and hardens within a few minutes using UV light. You let this resin dry in direct sunlight or under a UV lamp. 2 . You can also choose the Epoxy casting resin 1:1 or UltraEpoxy , these epoxy resins are very easy to use and suitable for larger surfaces. Make your Resin Art unique with these pigments You can give your Resin Art a unique twist with special color pigments. Achieve a full opaque color with shimmer, go for transparent pigment or pigment paste. Quickly view all color pigments especially for Resin Art.

    4,95

    Morgen bezorgd
  • Silicone Mold for Beads 12mm / 16mm

    Silicone Mold for Beads 12mm / 16mm

    Various bead molds for making flat, round and square beads. They have a threading hole of approximately 2 mm in size. The beads are flat, round or square and are ideal for making beautiful necklaces. Mold dimensions: 6x7 (lxw) Bead dimensions: 12 or 16 mm Hole: approx. 2 mm Contents: 0.5-5 grams of resin per bead Instructions: Make your own beads with epoxy Need epoxy? The use of suitable epoxy is important for the end result of your Resin Art art. We have two types of epoxy resins, both of which have advantages and disadvantages. 1 . Do you want to use epoxy that is very easy to process? Then choose our UV Resin . This epoxy is ready to use and hardens within a few minutes using UV light. You let this resin dry in direct sunlight or under a UV lamp. 2 . You can also choose the Epoxy casting resin 1:1 or UltraEpoxy , these epoxy resins are very easy to use and suitable for larger surfaces. Make your Resin Art unique with these pigments You can give your Resin Art a unique twist with special color pigments. Achieve a full opaque color with shimmer, go for transparent pigment or pigment paste. Quickly view all color pigments especially for Resin Art.

    3,95

    Morgen bezorgd
  • Sale -30% Epoxy starterspakket sieraden - #itsokay#

    Epoxy jewelry starter kit

    Are you looking for a creative hobby? Then create the most beautiful works of art and jewelry with this package! It is not without reason that this is the most popular resin art starter package ! All basic materials, epoxy, molds you need in 1 set. The ultimate starter package for yourself or as a gift. The most beautiful jewelry to your taste In this set you will find all the tools, epoxy and silicone molds that you need conveniently together in 1 set. Add your favorite decorations such as glitter, picked flowers, horse hair, pet hair or other unique accessories to resin and quickly and easily create the most beautiful unique jewelry exactly to your taste. Suitable for young and old! Epoxy starter package step-by-step plan Making your own jewelry such as earrings, pendants, bracelets and other art is very easy with this complete package. Beginner or advanced: everyone can make nice jewelry thanks to the handy booklet with examples and the step-by-step plan. Pour the ready-made UV Resin from the starter pack into one of the silicone molds. This resin has been specially developed for fast making jewelry and key rings and does not require mixing. The resin then dries by means of sunlight (even when it is cloudy). few minutes extremely hard. You can also use a UV LED lamp This allows the resin to dry faster. Need more resin? Then order an extra bottle of the ready-made UV Resin . Epoxy stater package worth €46.95 15 strong silicone molds (can also be used for soap and candles) - 2 large silicone molds for pendants - 1 silicone mold for stones/earrings - 1 silicone mold bracelet (70mm) - 1 silicone mold for 6 sizes of rings (13-17mm) - 5 elongated silicone molds for pendants - 4 various molds for earrings 5 Wax cord hangers & 5 sets of ear hooks 1 x Professional twist drill + 9 heads 25 x Gold and silver screw eyes 12 x Glitter powder sequin Supplied in a handy storage bag Booklet with examples + manual 25 grams of UV epoxy resin worth €9.95 *Items such as mixing cups, stir sticks, etc. must be purchased separately and can be found on our website

    42,9529,95

    Morgen bezorgd

  • UV Resin - Sieraden Epoxyhars - #itsokay#

    UV Resin - Jewelry Epoxy Resin

    UV Resin. This epoxy has been specially developed by us to make the most beautiful jewelry and art. This epoxy is ready-to-use and quick drying. Most commonly used epoxy for jewelry making . Thanks to a handy spout you can pour the epoxy directly from the bottle into a silicone mold. Also extremely suitable for application as a top coat (protective layer) for polymer clay, jewelry and other art. With other types of epoxy it is often necessary to add a UV stabilizer and hardener. Here you work with a mixing ratio of, for example, 1:1 or 1:6. This often goes wrong and the epoxy no longer hardens. You do not have this problem with this ready-made epoxy (resin)! Advantages of UV Resin Most easy to use: no mixing required Top quality and ordered 100,000+ times No or few bubbles Good UV resistance Hard with few minutes. Always works and no hassle! Colour: transparent 15, 25, 100 and 200 grams. The smaller bottles are useful for finer work. Quality warranty period: 12 months (keep in a cool, dry place, keep out of light) Curing time UV Resin UV LED lamp : a few minutes (both sides) Direct sunlight (sunny day): 5-10 minutes Direct sunlight (cloudy day): 30-45 minutes UV Resin ready-made UV Resin is an epoxy resin that you do not need to mix. It is ready-to-use and dries quickly! You pour this resin epoxy directly from the bottle onto the object or into the silicone mold. UV Resin hardens within 1-2 minutes by means of UV light and is for this reason often ordered for making jewelry, but is also extremely suitable for application as a top coat (protective layer) for e.g. polymer clay, jewelry, stones or making small art objects. Do not use UV Resin for projects deeper than 1 cm or wide surfaces such as casting a bookmark or sphere. Epoxy that is suitable for larger surfaces is the UltraEpoxy. UV Resin for jewelry making UV Resin is ideal for jewelry making for a number of different reasons. A major advantage is the fast curing time of the epoxy in combination with UV light. This allows you to make jewelry quickly, without a long wait during hardening. Another advantage of UV Resin is the clear and glossy finish, making it very suitable for finishing polymer clay jewelry, for example. In addition, UV Resin is very durable and resistant to scratches. This keeps your works of art or jewelry beautiful for a long time. Another nice advantage is that UV Resin is suitable for multiple techniques. UV resin is used, for example, to embed objects or create different layers. This is of course ideal if you want to make unique art. Pigment for UV Resin art Our UV resin is of high quality and very transparent (clear) in color. Would you prefer a tan? You can give your Resin Art a unique twist with special color pigments. Achieve a beautiful golden color with metallic powder or go for a transparent color with transparent pigment. You can also combine colors, allowing you to create special effects with your resin art. Quickly view all color pigments especially for Resin Art. Why choose UV Resin? UV Resin resin therefore has a number of significant advantages. First of all, it is the easiest epoxy resin to use, because you do not have to mix it. UV Resin can be poured directly into a silicone mold or applied to a surface as a coating. This ready-made epoxy is therefore ideal if you want to make small works of art, jewelry or key rings. UV Resin also hardens very quickly, allowing you to make the most beautiful creations within minutes. UV resin is water resistant Epoxy adheres easily to different types of surfaces. You can therefore use it for metal, concrete, plastic and wood, for example. This allows you to process UV epoxy resin in different ways. You can apply it as a transparent coating, but you can also create completely new art. Although UV Resin is a resin that combines perfectly with water, it is toxic to aquatic organisms. Coating or making products for an aquarium, for example, is therefore strongly discouraged. Working with UV Resin When you pour UV Resin into a silicone mold, it is advisable to use a silicone mat . A silicone mat protects your workplace while pouring epoxy. Simply remove the leftover epoxy resin from the mat and at the same time prevent epoxy from spilling on the table. Don't have a silicone mat at hand? Then you can also use other protection such as a plastic sheet. Silicone mold for UV Resin You can pour UV Resin into a silicone mold or apply it directly to an object. If you are going to pour UV Resin into a silicone mold, it is important that you choose transparent, high-quality silicone molds. When you pour the resin into a colored mold, such as a pink or dark mold, the UV rays cannot penetrate the resin properly and your work of art cannot harden properly. At itsOkay we only offer high quality transparent molds. Processing time of UV Resin UV Resin is a ready-to-use 1-component epoxy, the resin hardens within a few minutes using UV light. When using normal 2-part epoxy, curing usually takes 24-48 hours. This makes UV Resin much easier and faster to use. UV resin is widely used for making jewelry, key chains and other small objects. If you use a high-quality UV epoxy resin lamp, curing will be even faster. At itsOkay we sell various UV lamps especially for UV Resin. How do you use UV Resin? 1. Make sure you have created a spacious work surface in advance where you can start pouring. Preferably use a silicone work mat or newspapers/garbage bags as a surface to prevent accidental spills of resin. 2. When working with UV Resin, only use transparent silicone molds , such as those available for sale on our website. Make sure your molds are all clean and your work table is level. Is there dust or glitter on the mold? Then remove it with a piece of adhesive tape. > Are you going to pot objects (photos) or dried small flowers? Then you always pour this in layers. First you make a thin layer of epoxy where you soon it insert object. Let this layer harden first. After this, apply the next layer. > Do you add a photo or drawing to the epoxy? Then laminate it first or print it out on transparent paper. Otherwise, the epoxy may damage the photo or drawing. 3. You apply UV Resin directly to an object or pour directly into a silicone mold. You can give your Resin Art a unique twist with special color pigments. See our color pigments for epoxy. Are you going for a nice opaque color or are you going for a transparent color? 4. Air bubbles may form when working with epoxy. Many customers remove these with a lighter. This works well, but be careful otherwise the epoxy may stick to the mold. If you let the epoxy sit for a while after pouring, most of the air bubbles will pop on their own. 5. UV Resin hardens using UV light (sunlight). NB. If you do it right, it will dry in minutes. The following is important: UV Resin dries using UV light . This means in direct sunlight. This also works when it is cloudy. UV Resin does not dry indoors in front of a window. Do not work in direct sunlight or an area with a lot of sunlight or daylight, otherwise the epoxy may immediately harden while working. Level your creation in direct sun /cloud cover. Use a UV Epoxy LED lamp for faster curing. After curing, turn the mold or object over and let the other side dry . Never add too much pigment to epoxy. The composition of the epoxy is then no longer correct. This will prevent the epoxy from hardening. Do not use UV Blocker in combination with UV Resin. This will not harden properly. Do not use UV Resin for surfaces thicker than 1 cm or wide surfaces such as a bookmark or coaster. Working with UV Resin tips! Our experts recommend using a UV Epoxy Resin lamp to cure UV Resin faster. UV Resin always dries within a few minutes per side under our special lamps. That is very convenient, because you do not have to move your creation outside (the sun). Remove rough edges with pliers, scissors or deburrer. Is your epoxy artwork or coating still sticky? Stickiness is usually caused by the artwork being removed from a mold too quickly. The drying process is not yet complete. You can place your UV Resin creation back in the sun or under a UV lamp if you have one. The stickiness will then disappear automatically.

    6,95

    Morgen bezorgd
  • Sale -10% Epoxy Casting Resin UV - (UltraEpoxy Premium)

    Epoxy Casting Resin UV - (UltraEpoxy Premium)

    UltraEpoxy. Premium UV Epoxy casting resin of very high quality at a competitive price. Suitable for large and small surfaces such as art: jewelry, coasters, orgonites and more. Also very suitable for coatings: table tops, photo panels, kitchen tops, bar tables, paintings and more. This 'artificial epoxy' offers you the best quality. Has the least bubble, extreme clarity and good UV resistance . Easy to use for beginners and popular among experienced hobbyists. Advantages UltraEpoxy offers you the best quality To pour up to 1-3 centimeters thick Has the least bubbles and is extremely clear High UV resistance Food safe Adheres to almost any clean, dry surface (wood, concrete, plastic) Can be colored with 1-5% pigment of your choice Mixing ratio: 100:60 (100 grams of resin, 60 grams of hardener) Cured within +/- 24 hours (fully cured after 48-72 hours) and suitable for larger and smaller surfaces Supplied with information flyer about the working method Preparation Epoxy adheres poorly to a dirty or greasy surface. Therefore, always clean the surface or mold thoroughly beforehand. For example, use acetone or another degreaser. Are you going to cast in a silicone mold? Then clean the mold after each casting with a mild soapy solution, such as dishwashing liquid and warm water. Never use steel wool or scouring pads, as these can damage the silicone mold. Carefully remove your creation from the mold, otherwise the mold may be damaged. Casting resin for beginners and experienced artists The UltraEpoxy has been specially developed for experienced hobbyists, artists but also for beginners. By using high-quality and more expensive ingredients, this epoxy almost always cures beautifully. Even if you do not maintain the mixing ratio properly or if you pour under conditions that are too cold or warm. It is also widely applicable. Applying a beautiful coating to your table, casting a large silicone mold or making a small piece of jewelry, it's all possible with the UltraEpoxy. High UV resistance UltraEpoxy is one of the clearest epoxies and has very good UV resistance under normal conditions. With many cheap, but also more expensive epoxy, you run the risk of your creation yellowing because cheap ingredients are used. Are you going to cast transparently or will your artwork come into contact with direct sunlight? Always add a little UV blocker to the epoxy mixture. This so that you can be sure that your work of art or jewelry remains beautiful and does not yellow. Working with the UltraEpoxy Working with the UltraEpoxy is very simple: Epoxy consists of 2 components: the resin and a hardener. Weigh how much you need (see mixing chart below / your flyer when ordering). For example, weigh 100 grams of resin and 60 grams of hardener and combine them in one (silicone) mixing cup . Add pigment colors for epoxy if necessary. Make sure you mix the resin and hardener very well for 3 minutes; scrape the bottom and down the sides. Never add too much hardener to the resin. With epoxy it is important to maintain the mixing ratio correctly! Otherwise, the epoxy may remain soft or sticky. Cured epoxy is safe for both humans and animals. * This product consists of two components. So you have to mix it and let it harden. This product does not work with a UV lamp. Mixing schedule This diagram is also included in the box with your order. Do you find calculating the correct mixing ratio difficult or do you simply find it useful to have a diagram at hand? In the diagram below you can read exactly how much base (A) and hardener (B) you need per gram to mix epoxy correctly. A few grams more or less is no problem with this premium epoxy! Characteristics Mixing ratio: 100:60 (100 grams of resin, 60 grams of hardener) Processing time: 30-60 minutes (15-21°C) Dust dry: after 1-4 hours (20°C) Handleable: after 12 (20°C) Cured: after +/- 24 hours, full hardening: at least 2 days (48-72 hours) Heat resistance: 40-45 °C Pour thickness: 1-3 CM Food safe: Yes (for fruit bowl e.g.) Food safe: No (for cutting board e.g.) The use of epoxy casting resin Epoxy casting resin is a versatile material used for a wide range of applications. Consider, for example, resin art, coatings and casting objects. By mixing liquid resin with a hardener, you can make the most beautiful creations while epoxy resining. The liquid hardener and epoxy will harden slowly, creating a strong and durable layer for your designs. In addition, most epoxy resins are suitable for different surfaces. This includes concrete, an absorbent surface, plastic and wood. At ItsOkay we have a wide range of epoxy resins, so you will always find the right epoxy for your projects. It doesn't matter whether you want to coat or pour, it's all possible with our epoxy. What exactly is UV resistant epoxy casting resin? UV resistant epoxy casting resin is a type of epoxy formulated to resist the harmful effects of UV rays from the sun. Standard epoxy casting resins can discolour or degrade over time if exposed to too much sunlight. UV epoxy casting resin is specially designed to minimize negative effects of sunlight on your epoxy casting resin. This means that UV-resistant epoxy casting resin retains its clarity, color and durability for longer. This makes this epoxy casting resin suitable for outdoor creations. Epoxy tables for outside and inside Epoxy resin table tops can be a beautiful addition to the design of your home or garden. When creating outdoor table tops, large castings are used. This makes it important that you already have experience with creating epoxy cast resin works of art. For beginners, large castings can be a complex start. Are you a real epoxy casting resin do-it-yourselfer? Then you can give your outdoor space a unique touch with your creation. Do you have questions? Feel free to email our experts, we are happy to help. Because UV epoxy casting resin is more resistant to sunlight, you can create beautiful effects for outdoors. Liquid epoxy resin Liquid casting resin is a versatile product. This type of epoxy resin can be used for various surfaces and creations. Liquid epoxy casting resin is therefore perfectly suitable for creating works of art, casting table tops, laminating wood, repairing surfaces and much more. Liquid epoxy casting resin also offers excellent adhesion to various types of surfaces. This includes wood, metal and most plastics. This makes epoxy casting resin ideal for various applications. Epoxy casting resin with a simple mixing ratio If you are new to creating epoxy art, it can be difficult to choose from different types of epoxy. This Epoxy Casting Resin UV - (UltraEpoxy Premium) is an excellent choice if you are looking for a high quality universal epoxy casting resin. This epoxy is suitable for any surface. Our epoxy casting resin also has a simple mixing ratio of 100:60 and is supplied with a handy information flyer. This epoxy is therefore easy to use, especially for the novice artist. How safe is epoxy casting resin? Our epoxy casting resins have been extensively tested. However, it never hurts to use personal protection or protection for the table you work on. For example, if you are going to make epoxy cast resin creations at the kitchen table, you don't want to make a mess. Especially after complete curing, spilled epoxy casting resin is difficult to remove. Therefore, use newspapers or a durable silicone placemat for optimal protection. Even though our epoxy casting resin has been carefully tested, good protection is not an unnecessary luxury. Consider nitrile gloves if necessary and make sure you work in a well-ventilated area (window open). Fumes can be released when pouring epoxy resin. This concerns very small quantities, which makes epoxy casting resin certainly safe to use. Colored epoxy casting resin Our UV epoxy casting resin is extremely clear and transparent in color. With pigment you can mix epoxy and colors together, making it easy to put together the right colors. Discover our wide range of color pigments for epoxy. Moreover, you can also choose RAL colours. Ral colors are color codes developed by the German Reichsschauss für Lieferbedingungen und Gütesicherung institute. UV blocker epoxy casting resins For the very best results in transparent applications, you can add a UV blocker to epoxy casting resin. The UltraEpoxy is well protected against UV light, but when pouring transparently we always recommend adding a UV blocker. A UV blocker prevents long-term yellowing caused by UV rays. Epoxy casting resin for coating your creations This epoxy is also suitable for coating. The UltraEpoxy is a high quality versatile transparent epoxy. For example, you can use this epoxy to finish tables, tiles, kitchen tops and much more. This transparent epoxy has good adhesion to almost all surfaces, making it ideal for coatings. How much epoxy casting resin should you use? How much epoxy you need depends on the size of your project and the application. To apply a coating you need approximately 250 grams per m2 per layer, on wood it is usual to apply 2-3 layers. To pour epoxy into a mold, use approximately 1 kilo of epoxy per millimeter of layer thickness per m2. The product pages for silicone molds from itsOkay state exactly how much epoxy you need for the mold you want to order. You can use standard formulas for shapes such as squares, bars, rectangles and circles. Calculating volume of rectangles and squares: length in cm x width in cm x layer thickness in cm x 1.1 (specific weight): 1000 = number of kilograms of epoxy resin. Calculate volume of circles: 3.14 (pi) x radius in cm (half diameter) x radius in cm x layer thickness in cm x 1.1 = number of kilograms of epoxy. Buy epoxy Epoxy can be used for many purposes. This makes epoxy suitable for all kinds of creations. It is important that you always choose the right product. Don't know which epoxy casting resin is suitable for your creation? Then you can always take a look at our knowledge center or consult our experts. Do you have any questions? On our website you will find a wide range of epoxy products, including epoxy resin and supplies. Do you have questions about our accessories or epoxy resin? Then you can always contact our specialists without obligation. Our specialists are happy to help you with the right products for your casting and coating projects.

    15,5013,95

    Morgen bezorgd
  • Sale -12% Epoxy Casting Resin UV - (1:1 Casting Resin)

    Epoxy Casting Resin UV - (1:1 Casting Resin)

    Epoxy casting resin 1:1. UV Epoxy casting resin for crafts / hobbies. Making jewelry, coasters, orgonite and more. Suitable for large and small surfaces such as jewelry, coasters, orgonite and more. Also suitable for table tops, photo panels, kitchen tops, bar tables, paintings and more. This 'artificial epoxy' is of high quality. Easy mixing ratio of 1:1 (the only 1:1 brand) and therefore very popular among many hobbyists. Has few bubbles , is very clear and has good UV resistance . Advantages of pouring epoxy 1:1 The ratio is nice and easy: 1 to 1 To pour up to 1-3 centimeters thick Very clear and few bubbles Good UV resistance Adheres to almost any clean, dry surface (wood, concrete, plastic) Can be colored with a maximum of 1-5% pigment of your choice Cured within 24 hours and suitable for larger and smaller surfaces Preparation Epoxy adheres poorly to a dirty or greasy surface. Therefore, always clean the surface or mold thoroughly beforehand. For example, use acetone or another degreaser. Are you going to cast in a silicone mold? Then clean the mold after each casting with a mild soapy solution, such as dishwashing liquid and warm water. Never use steel wool or scouring pads, as these can damage the silicone mold. Carefully remove your creation from the mold, otherwise the mold may be damaged. High UV resistance This epoxy has good UV resistance under normal conditions. With many cheap, but also more expensive epoxy, you run the risk of your creation yellowing because cheap ingredients are used. Are you going to cast transparently or will your artwork come into contact with direct sunlight? Always add a little UV blocker to the epoxy mixture. This so that you can be sure that your work of art or jewelry remains beautiful and does not yellow. Working with the Epoxy resin 1:1 Working with this epoxy resin is the easiest , because you work with a 1:1 mixing ratio: 1. Epoxy consists of 2 components: the resin (a) and a hardener (b). 2. Weigh how much you need. For example, weigh 10 grams of resin and 10 grams of hardener and combine this in one (silicone) mixing cup to make 20 grams of epoxy in total. If necessary, add color pigment for epoxy resin. 3. Make sure you mix the resin and hardener very well for 3 minutes; scrape the bottom and down the sides. 4 . Never add too much hardener to the resin. With epoxy it is important to maintain the mixing ratio correctly! Otherwise, the epoxy may remain soft or sticky. Cured epoxy is safe for both humans and animals. * This product consists of two components. So you have to mix it and let it harden. This product does not work with a UV lamp. Properties of pouring epoxy 250 gram packaging: 125 gram bottle of resin and 125 gram hardener etc 500 gram packaging: 250 gram bottle of resin and 250 gram hardener etc Mixing ratio: 1:1 (1 gram resin, 1 gram hardener) Processing time: 30-60 minutes (15-21°C) Dust dry: after 1-4 hours (20°C) Can be handled: after 12 hours (20°C) Full hardening: 2 days Heat resistance: 40-45 °C Pour thickness: 1-3 CM Food safe: No Liquid epoxy resin When you want to start with epoxy resin, it is important that you choose high-quality pouring epoxy. A good quality pouring epoxy will almost always cure well and beautifully. Maintaining the correct mixing ratio is also very important when pouring epoxy resin. An incorrect ratio can cause, for example, incomplete curing. Our epoxy resin has a mixing ratio of 1:1. This is the simplest mixing ratio. Super easy and you can't go wrong! Choose the right epoxy molds Are you looking for a specific shape? No problem. We then have 300+ silicone molds in stock in our range. Through our website you can only purchase high-quality silicone molds, which are specially made for casting epoxy resin works of art. Silicone molds are ideal because you can easily remove the epoxy casting resin from the mold after curing. In addition, these molds are sustainable in use, because they can often be reused. Widely applicable epoxy casting resin This clear epoxy casting resin is ideal for use for various purposes. How about an epoxy serving board or your own jewelry. Our epoxy resins are also ideal for larger projects. Did you know, for example, that this epoxy is also often chosen for an epoxy coating of figurines and furniture? This epoxy casting resin is therefore a very versatile product. Curing time of your resin art project When you start working with Resin Art, you must take the curing time into account. On a sunny day, curing is a lot faster than on a cloudy or cold day. Epoxy is best processed at a temperature of approximately 21°C. When it is colder, the processing time will be longer and the curing will take longer. When it is warmer the opposite applies. This epoxy casting resin has a processing time of approximately 60 minutes and it hardens within approximately 24 hours. If you process this epoxy at a temperature of, for example, 15°C, curing can take up to 30 hours. Different colors and decorations This epoxy casting resin is very clear and transparent in color. You can therefore pour this epoxy transparently. Of course you can create cool effects by adding color pigment . Quickly discover our wide range of color pigments and choose your favorite color. You can not only create color by using pigments, but also with glitter, for example. By adding glitter to your transparent epoxy casting, you can make your creations truly unique. Using epoxy for laminating Epoxy is also ideal for laminating certain products. Laminating is actually applying a coating. This allows you to protect and strengthen your products and surfaces. It is therefore widely used for wood, fiberglass and carbon fiber. Is epoxy resin safe to use? We are often asked by beginners whether epoxy casting resin is safe to use. Epoxy casting resin is certainly safe to use, but we always recommend taking precautions. Fumes can be released during the curing and mixing of epoxy. If you work with cheap epoxy resins or those that come from abroad, you have a greater risk of this. Our epoxy meets all safety requirements. You won't have any trouble with this. This epoxy casting resin is safe to use. Buy pour epoxy resin If you want to get started with epoxy casting resin, then you have come to the right place at epoxy expert itsOkay. You can contact us for universal epoxy resin and all other supplies. Our epoxy resin is of the highest quality. This makes our epoxy resins ideal for coating or for creating all kinds of works of art. Do you want to buy epoxy, but do you still have questions? Then you can always contact our customer service without obligation. Our team of specialists is happy to help you answer all your questions.

    16,9514,95

    Morgen bezorgd
  • Duurzame siliconen mengbeker 100 / 250 ml - #itsokay#

    Durable silicone mixing cup 100 / 250 / 750 ml

    Easily measure the appropriate amounts of epoxy with this silicone measuring cup. Can be reused endlessly. When mixing resin with color pigments or 2-component resin such as UltraEpoxy and Epoxy 1:1 casting resin, it is important to mix very well. This mixing cup is made of high-quality silicone , to which the epoxy does not adhere. You can use this measuring cup while making your Resin Art and easily clean and reuse it. When working with epoxy you create waste. Using your own reusable mixing cup saves waste and raw materials. Disposable cups end up in the residual waste and are incinerated. When you have finished working, you can let the epoxy resin dry out and then easily release it. Mixing cup features Flexible and endlessly reusable Easy to pour Contents: 100, 250 or 750 ml Material: silicone Mixing epoxy resin Do you use a 2-component epoxy resin? Weigh how much you need and pour both components into 1 cup. Mix both components thoroughly (also carefully scrape the edges and bottom of the mixing bowl). Stir well for 3 minutes and add if necessary pigment for epoxy to. The material is now well mixed and ready for use.

    2,45

    Morgen bezorgd
  • Duurzame siliconen mengstokjes (3 st.) - #itsokay#

    Durable silicone mixing sticks (3 pcs.)

    Durable silicone mixing sticks / stir sticks. Use these while creating your Resin Art art. These 3 mixing sticks are made of silicone, so the epoxy does not adhere to your sticks. The sticks are therefore infinitely reusable ! Ideal if you want to make jewelry and other Resin Art works yourself. When working with epoxy you create a lot of waste. Using your own reusable mixing cup saves waste and raw materials. Disposable cups end up in the residual waste and are incinerated. When you have finished working, you can let the epoxy resin dry out and then easily detach it from the sticks. Dimensions: 14 cm long Material: Silicone Reusable : Yes

    7,95

    Morgen bezorgd

  • Siliconen Gereedschap Set (4 stuks) - #itsokay#

    Durable Silicone Tools (4 pcs.)

    Durable tools. You get 2 silicone pouring cups + 2 silicone tools. Can be reused endlessly! For mixing very small amounts of epoxy with color pigments it is very useful to have a small set of mixing cups. It is not convenient to have to mix resin for a necklace / key ring in a large mixing cup of 100/250 ml. This mixing cup is made of high quality silicone , to which the epoxy does not adhere. You can use this measuring cup well while making your Resin Art and easily clean and reuse. When working with epoxy you create waste. Using your own reusable mixing cup saves waste and raw materials. Disposable cups end up in the residual waste and are incinerated. When you have finished working, you can let the epoxy resin dry out and then easily release it. Shape: Mixing cup Material: Silicone Contents: 2 x 25 ml mixing cup Tools: small scoop and small tool with mixing tip Reusable: Yes Dimensions: tools 12 cm long / cups 5 x 3 cm. Please note: there are no measurements (centimeters) on the pouring cups

    6,95

    Morgen bezorgd
  • Duurzame Siliconen Mat - #itsokay#

    Durable Silicone Mat

    Use this silicone mat as a surface while working with craft supplies such as glue and epoxy resin. This mat is made of silicone, so the epoxy/glue does not adhere to the mat. Ideal if you want to make jewelry and other small Resin Art works yourself. When working with epoxy you create a lot of waste. Using your own sustainable silicone mat saves waste and raw materials. When you are done and your artwork has dried, you can remove any residual epoxy resin from your mold and then simply rinse the mat clean and use it again. Carefully remove the leftover epoxy resin from the mat and avoid damage. You can then clean the mat with water and mild soapy water. Mat dimensions: Variant 1: length: 29.5 cm x width: 21 cm Variant 1: length: 40 cm x width : 30 cm Material: Silicone Reusable: Yes

    3,25

    Morgen bezorgd
  • Sale -35% Epoxy Pigment Pasta | QualityDecorations™ | 18 kleuren - #itsokay#

    Epoxy Pigment Paste | QualityDecorations™ | 18 colors

    High quality epoxy pigment paste from QualityDecorations™. High quality pigment paste. Specially developed for art and Resin-Art. You can choose from 18 colors of Premium Mica Pigments / Pastes for all types of epoxy resin. Effect: Even full opaque color . The pigments are in paste form and will provide 100% even coverage to the resin. Packaging: 1 jar Contents: 50 grams per jar The pigment pastes from Quality Decorations are among the most beautiful. Specially for getting epoxy resin, gel coats, top coats and casting resin in the desired color. Add 2% pigment color to your creation and create the most beautiful full opaque colors. Advantages Always high quality with Quality Decorations High opaque color Easy in use Suitable for any epoxy resin Very long shelf life How do you use epoxy pigment paste? Epoxy pigment paste, like our other pigments for epoxy, is easy to use. When working with epoxy resin, the time factor is very important, because the resin can harden very quickly during processing. That is why you must have all the necessary materials at hand at the workplace. Protect your workplace against possible splashes, for example with plastic tarpaulins. Protecting your health has the highest priority. Always wear nitrile gloves when working with epoxy resin. If you use our UV Resin , you can immediately add the pigment colors to it. Do you use an epoxy casting resin? Then first mix the resin and hardener thoroughly in the mixing ratio recommended by the manufacturer. Once you have carefully mixed the two components together, it is time to add the color. Add pigments as desired to the mixture and mix everything well. Repeat this process until you achieve the desired color shade. The basic principle is: in order not to negatively influence the mixing ratio and thus influence curing, the proportion of paint should not exceed 5%.

    11,957,75

    Morgen bezorgd
  • Siliconen mal hartjes - #itsokay#

    Silicone mold heart

    Beautiful silicone mold for making hearts Three different sizes of deep heart molds. These molds are not suitable for the oven or dishwasher. Contents of moulds: approximately 15 grams of resin for the two small sizes and 20 grams for the larger one. Need epoxy? The use of suitable epoxy is important for the end result of your Resin Art art. We recommend using Epoxy casting resin 1:1 or UltraEpoxy for these types of molds. These epoxy resins are very easy to use and suitable for larger surfaces. Make your Resin Art unique with these pigments You can give your Resin Art a unique twist with special color pigments. Achieve a full opaque color with shimmer, go for transparent pigment or pigment paste. Quickly view all color pigments especially for Resin Art.

    4,95

    Morgen bezorgd
  • Siliconen Mal Voor 12 Hangers - #itsokay#

    Silicone mold hangers (12 shapes)

    Silicone mold for making 12 super cute pendants Pour epoxy resin into the mold and add dye here, dried flowers or other things you like. The mold is not suitable for the oven or microwave. Made of flexible silicone, so it is easy to use and can be reused multiple times. Want to make a pendant or necklace ? The molds already have a hole and you can directly put a wire or cord through it. Want to make an earring/pendant? There are already holes in the mold. Do An metal ring in a hole and hang one here ear hook . Also see: - Ready-made necklaces - metal rings - screw eyes - brass lobster clasps - ear hooks Please note: this mold is also included in the Jewelry making package Mold dimensions: 11.4cm wide, 15.3cm long and 8.5mm thick Mold content: approximately 3-6 grams per pendant Need epoxy? The use of suitable epoxy is important for the end result of your Resin Art art. We have two types of epoxy resins, both of which have advantages and disadvantages. 1 . Do you want to use epoxy that is very easy to process? Then choose our UV Resin . This epoxy is ready to use and hardens within a few minutes using UV light. You let this resin dry in direct sunlight or under a UV lamp. 2 . You can also choose the Epoxy casting resin 1:1 or UltraEpoxy , these epoxy resins are very easy to use and suitable for larger surfaces. Make your Resin Art unique with these pigments You can give your Resin Art a unique twist with special color pigments. Achieve a full opaque color with shimmer, go for transparent pigment or pigment paste. Quickly view all color pigments especially for Resin Art.

    4,95

    Morgen bezorgd

Login

Forgot your password?

Don't have an account yet?
Create account