Excellent

Epoxy Casting Resin UV - (UltraEpoxy Premium)

    Description

    UltraEpoxy. Premium UV Epoxy casting resin of very high quality at a competitive price.

    Suitable for large and small surfaces such as art: jewelry, coasters, orgonites and more. Also very suitable for coatings: table tops, photo panels, kitchen tops, bar tables, paintings and more.

    This 'artificial epoxy' offers you the best quality. Has the least bubble, extreme clarity and good UV resistance . Easy to use for beginners and popular among experienced hobbyists.

    Advantages

    • UltraEpoxy offers you the best quality
    • To pour up to 1-3 centimeters thick
    • Has the least bubbles and is extremely clear
    • High UV resistance
    • Food safe
    • Adheres to almost any clean, dry surface (wood, concrete, plastic)
    • Can be colored with 1-5% pigment of your choice
    • Mixing ratio: 100:60 (100 grams of resin, 60 grams of hardener)
    • Cured within +/- 24 hours (fully cured after 48-72 hours) and suitable for larger and smaller surfaces
    • Supplied with information flyer about the working method

    Preparation

    Epoxy adheres poorly to a dirty or greasy surface. Therefore, always clean the surface or mold thoroughly beforehand. For example, use acetone or another degreaser.
    Are you going to cast in a silicone mold? Then clean the mold after each casting with a mild soapy solution, such as dishwashing liquid and warm water. Never use steel wool or scouring pads, as these can damage the silicone mold. Carefully remove your creation from the mold, otherwise the mold may be damaged.

    Casting resin for beginners and experienced artists

    The UltraEpoxy has been specially developed for experienced hobbyists, artists but also for beginners. By using high-quality and more expensive ingredients, this epoxy almost always cures beautifully. Even if you do not maintain the mixing ratio properly or if you pour under conditions that are too cold or warm. It is also widely applicable. Applying a beautiful coating to your table, casting a large silicone mold or making a small piece of jewelry, it's all possible with the UltraEpoxy.

    High UV resistance

    UltraEpoxy is one of the clearest epoxies and has very good UV resistance under normal conditions. With many cheap, but also more expensive epoxy, you run the risk of your creation yellowing because cheap ingredients are used.
    Are you going to cast transparently or will your artwork come into contact with direct sunlight? Always add a little UV blocker to the epoxy mixture. This so that you can be sure that your work of art or jewelry remains beautiful and does not yellow.

    Working with the UltraEpoxy

    Working with the UltraEpoxy is very simple:

    1. Epoxy consists of 2 components: the resin and a hardener.
    2. Weigh how much you need (see mixing chart below / your flyer when ordering). For example, weigh 100 grams of resin and 60 grams of hardener and combine them in one (silicone) mixing cup . Add pigment colors for epoxy if necessary.
    3. Make sure you mix the resin and hardener very well for 3 minutes; scrape the bottom and down the sides.
    4. Never add too much hardener to the resin. With epoxy it is important to maintain the mixing ratio correctly! Otherwise, the epoxy may remain soft or sticky. Cured epoxy is safe for both humans and animals.

    * This product consists of two components. So you have to mix it and let it harden. This product does not work with a UV lamp.

    Mixing schedule

    This diagram is also included in the box with your order. Do you find calculating the correct mixing ratio difficult or do you simply find it useful to have a diagram at hand? In the diagram below you can read exactly how much base (A) and hardener (B) you need per gram to mix epoxy correctly. A few grams more or less is no problem with this premium epoxy!


    Characteristics

    • Mixing ratio: 100:60 (100 grams of resin, 60 grams of hardener)
    • Processing time: 30-60 minutes (15-21°C)
    • Dust dry: after 1-4 hours (20°C)
    • Handleable: after 12 (20°C)
    • Cured: after +/- 24 hours, full hardening: at least 2 days (48-72 hours)
    • Heat resistance: 40-45 °C
    • Pour thickness: 1-3 CM
    • Food safe: Yes (for fruit bowl e.g.)
    • Food safe: No (for cutting board e.g.)

    The use of epoxy casting resin

    Epoxy casting resin is a versatile material used for a wide range of applications. Consider, for example, resin art, coatings and casting objects. By mixing liquid resin with a hardener, you can make the most beautiful creations while epoxy resining.

    The liquid hardener and epoxy will harden slowly, creating a strong and durable layer for your designs. In addition, most epoxy resins are suitable for different surfaces. This includes concrete, an absorbent surface, plastic and wood.

    At ItsOkay we have a wide range of epoxy resins, so you will always find the right epoxy for your projects. It doesn't matter whether you want to coat or pour, it's all possible with our epoxy.

    What exactly is UV resistant epoxy casting resin?

    UV resistant epoxy casting resin is a type of epoxy formulated to resist the harmful effects of UV rays from the sun. Standard epoxy casting resins can discolour or degrade over time if exposed to too much sunlight.

    UV epoxy casting resin is specially designed to minimize negative effects of sunlight on your epoxy casting resin. This means that UV-resistant epoxy casting resin retains its clarity, color and durability for longer. This makes this epoxy casting resin suitable for outdoor creations.

    Epoxy tables for outside and inside

    Epoxy resin table tops can be a beautiful addition to the design of your home or garden. When creating outdoor table tops, large castings are used. This makes it important that you already have experience with creating epoxy cast resin works of art. For beginners, large castings can be a complex start. Are you a real epoxy casting resin do-it-yourselfer? Then you can give your outdoor space a unique touch with your creation. Do you have questions? Feel free to email our experts, we are happy to help.
    Because UV epoxy casting resin is more resistant to sunlight, you can create beautiful effects for outdoors.

    Liquid epoxy resin

    Liquid casting resin is a versatile product. This type of epoxy resin can be used for various surfaces and creations. Liquid epoxy casting resin is therefore perfectly suitable for creating works of art, casting table tops, laminating wood, repairing surfaces and much more.

    Liquid epoxy casting resin also offers excellent adhesion to various types of surfaces. This includes wood, metal and most plastics. This makes epoxy casting resin ideal for various applications.

    Epoxy casting resin with a simple mixing ratio

    If you are new to creating epoxy art, it can be difficult to choose from different types of epoxy. This Epoxy Casting Resin UV - (UltraEpoxy Premium) is an excellent choice if you are looking for a high quality universal epoxy casting resin. This epoxy is suitable for any surface.

    Our epoxy casting resin also has a simple mixing ratio of 100:60 and is supplied with a handy information flyer. This epoxy is therefore easy to use, especially for the novice artist.

    How safe is epoxy casting resin?

    Our epoxy casting resins have been extensively tested. However, it never hurts to use personal protection or protection for the table you work on. For example, if you are going to make epoxy cast resin creations at the kitchen table, you don't want to make a mess. Especially after complete curing, spilled epoxy casting resin is difficult to remove. Therefore, use newspapers or a durable silicone placemat for optimal protection.

    Even though our epoxy casting resin has been carefully tested, good protection is not an unnecessary luxury. Consider nitrile gloves if necessary and make sure you work in a well-ventilated area (window open). Fumes can be released when pouring epoxy resin. This concerns very small quantities, which makes epoxy casting resin certainly safe to use.

    Colored epoxy casting resin

    Our UV epoxy casting resin is extremely clear and transparent in color. With pigment you can mix epoxy and colors together, making it easy to put together the right colors. Discover our wide range of color pigments for epoxy.

    Moreover, you can also choose RAL colours. Ral colors are color codes developed by the German Reichsschauss für Lieferbedingungen und Gütesicherung institute.

    UV blocker epoxy casting resins

    For the very best results in transparent applications, you can add a UV blocker to epoxy casting resin. The UltraEpoxy is well protected against UV light, but when pouring transparently we always recommend adding a UV blocker. A UV blocker prevents long-term yellowing caused by UV rays.

    Epoxy casting resin for coating your creations

    This epoxy is also suitable for coating. The UltraEpoxy is a high quality versatile transparent epoxy. For example, you can use this epoxy to finish tables, tiles, kitchen tops and much more. This transparent epoxy has good adhesion to almost all surfaces, making it ideal for coatings.

    How much epoxy casting resin should you use?

    How much epoxy you need depends on the size of your project and the application. To apply a coating you need approximately 250 grams per m2 per layer, on wood it is usual to apply 2-3 layers.

    To pour epoxy into a mold, use approximately 1 kilo of epoxy per millimeter of layer thickness per m2. The product pages for silicone molds from itsOkay state exactly how much epoxy you need for the mold you want to order. You can use standard formulas for shapes such as squares, bars, rectangles and circles.

    • Calculating volume of rectangles and squares: length in cm x width in cm x layer thickness in cm x 1.1 (specific weight): 1000 = number of kilograms of epoxy resin.
    • Calculate volume of circles: 3.14 (pi) x radius in cm (half diameter) x radius in cm x layer thickness in cm x 1.1 = number of kilograms of epoxy.

    Buy epoxy

    Epoxy can be used for many purposes. This makes epoxy suitable for all kinds of creations. It is important that you always choose the right product. Don't know which epoxy casting resin is suitable for your creation? Then you can always take a look at our knowledge center or consult our experts.

    Do you have any questions?

    On our website you will find a wide range of epoxy products, including epoxy resin and supplies. Do you have questions about our accessories or epoxy resin? Then you can always contact our specialists without obligation.

    Our specialists are happy to help you with the right products for your casting and coating projects.

    Epoxy Casting Resin UV - (UltraEpoxy Premium)

      Product form
      Sale -10%

      Adviesprijs 15,5013,95

      Ordered before 11:30 PM (Mon-Sun), delivered tomorrow

        Description

        UltraEpoxy. Premium UV Epoxy casting resin of very high quality at a competitive price.

        Suitable for large and small surfaces such as art: jewelry, coasters, orgonites and more. Also very suitable for coatings: table tops, photo panels, kitchen tops, bar tables, paintings and more.

        This 'artificial epoxy' offers you the best quality. Has the least bubble, extreme clarity and good UV resistance . Easy to use for beginners and popular among experienced hobbyists.

        Advantages

        • UltraEpoxy offers you the best quality
        • To pour up to 1-3 centimeters thick
        • Has the least bubbles and is extremely clear
        • High UV resistance
        • Food safe
        • Adheres to almost any clean, dry surface (wood, concrete, plastic)
        • Can be colored with 1-5% pigment of your choice
        • Mixing ratio: 100:60 (100 grams of resin, 60 grams of hardener)
        • Cured within +/- 24 hours (fully cured after 48-72 hours) and suitable for larger and smaller surfaces
        • Supplied with information flyer about the working method

        Preparation

        Epoxy adheres poorly to a dirty or greasy surface. Therefore, always clean the surface or mold thoroughly beforehand. For example, use acetone or another degreaser.
        Are you going to cast in a silicone mold? Then clean the mold after each casting with a mild soapy solution, such as dishwashing liquid and warm water. Never use steel wool or scouring pads, as these can damage the silicone mold. Carefully remove your creation from the mold, otherwise the mold may be damaged.

        Casting resin for beginners and experienced artists

        The UltraEpoxy has been specially developed for experienced hobbyists, artists but also for beginners. By using high-quality and more expensive ingredients, this epoxy almost always cures beautifully. Even if you do not maintain the mixing ratio properly or if you pour under conditions that are too cold or warm. It is also widely applicable. Applying a beautiful coating to your table, casting a large silicone mold or making a small piece of jewelry, it's all possible with the UltraEpoxy.

        High UV resistance

        UltraEpoxy is one of the clearest epoxies and has very good UV resistance under normal conditions. With many cheap, but also more expensive epoxy, you run the risk of your creation yellowing because cheap ingredients are used.
        Are you going to cast transparently or will your artwork come into contact with direct sunlight? Always add a little UV blocker to the epoxy mixture. This so that you can be sure that your work of art or jewelry remains beautiful and does not yellow.

        Working with the UltraEpoxy

        Working with the UltraEpoxy is very simple:

        1. Epoxy consists of 2 components: the resin and a hardener.
        2. Weigh how much you need (see mixing chart below / your flyer when ordering). For example, weigh 100 grams of resin and 60 grams of hardener and combine them in one (silicone) mixing cup . Add pigment colors for epoxy if necessary.
        3. Make sure you mix the resin and hardener very well for 3 minutes; scrape the bottom and down the sides.
        4. Never add too much hardener to the resin. With epoxy it is important to maintain the mixing ratio correctly! Otherwise, the epoxy may remain soft or sticky. Cured epoxy is safe for both humans and animals.

        * This product consists of two components. So you have to mix it and let it harden. This product does not work with a UV lamp.

        Mixing schedule

        This diagram is also included in the box with your order. Do you find calculating the correct mixing ratio difficult or do you simply find it useful to have a diagram at hand? In the diagram below you can read exactly how much base (A) and hardener (B) you need per gram to mix epoxy correctly. A few grams more or less is no problem with this premium epoxy!


        Characteristics

        • Mixing ratio: 100:60 (100 grams of resin, 60 grams of hardener)
        • Processing time: 30-60 minutes (15-21°C)
        • Dust dry: after 1-4 hours (20°C)
        • Handleable: after 12 (20°C)
        • Cured: after +/- 24 hours, full hardening: at least 2 days (48-72 hours)
        • Heat resistance: 40-45 °C
        • Pour thickness: 1-3 CM
        • Food safe: Yes (for fruit bowl e.g.)
        • Food safe: No (for cutting board e.g.)

        The use of epoxy casting resin

        Epoxy casting resin is a versatile material used for a wide range of applications. Consider, for example, resin art, coatings and casting objects. By mixing liquid resin with a hardener, you can make the most beautiful creations while epoxy resining.

        The liquid hardener and epoxy will harden slowly, creating a strong and durable layer for your designs. In addition, most epoxy resins are suitable for different surfaces. This includes concrete, an absorbent surface, plastic and wood.

        At ItsOkay we have a wide range of epoxy resins, so you will always find the right epoxy for your projects. It doesn't matter whether you want to coat or pour, it's all possible with our epoxy.

        What exactly is UV resistant epoxy casting resin?

        UV resistant epoxy casting resin is a type of epoxy formulated to resist the harmful effects of UV rays from the sun. Standard epoxy casting resins can discolour or degrade over time if exposed to too much sunlight.

        UV epoxy casting resin is specially designed to minimize negative effects of sunlight on your epoxy casting resin. This means that UV-resistant epoxy casting resin retains its clarity, color and durability for longer. This makes this epoxy casting resin suitable for outdoor creations.

        Epoxy tables for outside and inside

        Epoxy resin table tops can be a beautiful addition to the design of your home or garden. When creating outdoor table tops, large castings are used. This makes it important that you already have experience with creating epoxy cast resin works of art. For beginners, large castings can be a complex start. Are you a real epoxy casting resin do-it-yourselfer? Then you can give your outdoor space a unique touch with your creation. Do you have questions? Feel free to email our experts, we are happy to help.
        Because UV epoxy casting resin is more resistant to sunlight, you can create beautiful effects for outdoors.

        Liquid epoxy resin

        Liquid casting resin is a versatile product. This type of epoxy resin can be used for various surfaces and creations. Liquid epoxy casting resin is therefore perfectly suitable for creating works of art, casting table tops, laminating wood, repairing surfaces and much more.

        Liquid epoxy casting resin also offers excellent adhesion to various types of surfaces. This includes wood, metal and most plastics. This makes epoxy casting resin ideal for various applications.

        Epoxy casting resin with a simple mixing ratio

        If you are new to creating epoxy art, it can be difficult to choose from different types of epoxy. This Epoxy Casting Resin UV - (UltraEpoxy Premium) is an excellent choice if you are looking for a high quality universal epoxy casting resin. This epoxy is suitable for any surface.

        Our epoxy casting resin also has a simple mixing ratio of 100:60 and is supplied with a handy information flyer. This epoxy is therefore easy to use, especially for the novice artist.

        How safe is epoxy casting resin?

        Our epoxy casting resins have been extensively tested. However, it never hurts to use personal protection or protection for the table you work on. For example, if you are going to make epoxy cast resin creations at the kitchen table, you don't want to make a mess. Especially after complete curing, spilled epoxy casting resin is difficult to remove. Therefore, use newspapers or a durable silicone placemat for optimal protection.

        Even though our epoxy casting resin has been carefully tested, good protection is not an unnecessary luxury. Consider nitrile gloves if necessary and make sure you work in a well-ventilated area (window open). Fumes can be released when pouring epoxy resin. This concerns very small quantities, which makes epoxy casting resin certainly safe to use.

        Colored epoxy casting resin

        Our UV epoxy casting resin is extremely clear and transparent in color. With pigment you can mix epoxy and colors together, making it easy to put together the right colors. Discover our wide range of color pigments for epoxy.

        Moreover, you can also choose RAL colours. Ral colors are color codes developed by the German Reichsschauss für Lieferbedingungen und Gütesicherung institute.

        UV blocker epoxy casting resins

        For the very best results in transparent applications, you can add a UV blocker to epoxy casting resin. The UltraEpoxy is well protected against UV light, but when pouring transparently we always recommend adding a UV blocker. A UV blocker prevents long-term yellowing caused by UV rays.

        Epoxy casting resin for coating your creations

        This epoxy is also suitable for coating. The UltraEpoxy is a high quality versatile transparent epoxy. For example, you can use this epoxy to finish tables, tiles, kitchen tops and much more. This transparent epoxy has good adhesion to almost all surfaces, making it ideal for coatings.

        How much epoxy casting resin should you use?

        How much epoxy you need depends on the size of your project and the application. To apply a coating you need approximately 250 grams per m2 per layer, on wood it is usual to apply 2-3 layers.

        To pour epoxy into a mold, use approximately 1 kilo of epoxy per millimeter of layer thickness per m2. The product pages for silicone molds from itsOkay state exactly how much epoxy you need for the mold you want to order. You can use standard formulas for shapes such as squares, bars, rectangles and circles.

        • Calculating volume of rectangles and squares: length in cm x width in cm x layer thickness in cm x 1.1 (specific weight): 1000 = number of kilograms of epoxy resin.
        • Calculate volume of circles: 3.14 (pi) x radius in cm (half diameter) x radius in cm x layer thickness in cm x 1.1 = number of kilograms of epoxy.

        Buy epoxy

        Epoxy can be used for many purposes. This makes epoxy suitable for all kinds of creations. It is important that you always choose the right product. Don't know which epoxy casting resin is suitable for your creation? Then you can always take a look at our knowledge center or consult our experts.

        Do you have any questions?

        On our website you will find a wide range of epoxy products, including epoxy resin and supplies. Do you have questions about our accessories or epoxy resin? Then you can always contact our specialists without obligation.

        Our specialists are happy to help you with the right products for your casting and coating projects.

        Recently visited articles

          Login

          Forgot your password?

          Don't have an account yet?
          Create account