Excellent

Spiritual silicone molds

20 products


    • Ordered before 11:30 PM , delivered tomorrow
    • More than 5 years of experience in the field of epoxy art
    • Free expert advice
    • Ordered before 11:30 PM , delivered tomorrow
    • More than 5 years of experience in the field of epoxy art
    • Free expert advice
    • Ordered before 11:30 PM , delivered tomorrow
    • More than 5 years of experience in the field of epoxy art
    • Free expert advice
  • Siliconen Mal Piramide / Orgonite - #itsokay#

    Pyramid / Orgonite Silicone mold

    Pyramid silicone mold. With this silicone mold you can easily make small pyramids or orgonites yourself. Read the manual here: DIY orgonite / pyramid making with epoxy Pour resin into the mold and add food coloring, gemstones, dried flowers or other things you like. Large sturdy silicone mold. Made of silicone and are flexible. The molds are reusable but not suitable for the oven or dishwasher. Dimensions variant 1: 15.5 x 15.5 cm (mega mold: 1200 ml epoxy) variant 2: 9.5 x 9.5 cm (large mould: 250 ml epoxy) variant 3: 5.0 x 5.0 cm (small mould: 50 ml epoxy) Read the manual here: DIY orgonite / pyramid making with epoxy Need epoxy? The use of suitable epoxy is important for the end result of your Resin Art art. We recommend using Epoxy casting resin 1:1 or UltraEpoxy for these types of molds. These epoxy resins are very easy to use and suitable for larger surfaces. Make your Resin Art unique with these pigments You can give your Resin Art a unique twist with special color pigments. Achieve a full opaque color with shimmer, go for transparent pigment or pigment paste. Quickly view all color pigments especially for Resin Art.

    7,95

    Morgen bezorgd
  • Siliconen Mal Sterrenbeelden | Sterrenbeeld | Hangers - #itsokay#

    Silicone Mold Zodiac Sign

    Silicone mold for making a zodiac sign necklace / keychain Pour epoxy into the mold and add food coloring, dried flowers , gold foil or other decorations. Tip! You can color the symbols with a posca paint marker or pre-cast with a pipette and epoxy resin mixed with pigment. In modern astrology, the 12 signs represent 12 basic personalities. To determine these personalities, the signs are divided into the 4 elements, into cardinal signs, fixed signs and mutable signs. Want to make a keychain? Also see: - metal rings - screw eyes - ready-made key rings Mold dimensions: 13.5 cm long x 8.5 cm wide Mold contents: 5 grams per mould Need epoxy? The use of suitable epoxy is important for the end result of your Resin Art art. We have two types of epoxy resins, both of which have advantages and disadvantages. 1 . Do you want to use epoxy that is very easy to process? Then choose our UV Resin . This epoxy is ready to use and hardens within a few minutes using UV light. You let this resin dry in direct sunlight or under a UV lamp. 2 . You can also choose the Epoxy casting resin 1:1 or UltraEpoxy , these epoxy resins are very easy to use and suitable for larger surfaces. Make your Resin Art unique with these pigments You can give your Resin Art a unique twist with special color pigments. Achieve a full opaque color with shimmer, go for transparent pigment or pigment paste. Quickly view all color pigments especially for Resin Art.

    7,95

    Morgen bezorgd
  • Last stock! Siliconen Mal Tai Chi | Ying en Yang Ketting - #itsokay#

    Silicone Mold Tai Chi - Ying and Yang

    Silicone mold for making a Tai Chi or Ying and Yang Necklace First pour the epoxy resin into a silicone mixing cup and add coloring and decorations. Stir well and carefully add the mixed epoxy resin to the mold with a pipette or skewer. The mold is not suitable for the oven or microwave. Made of flexible silicone, so it is easy to use and can be reused multiple times. Pendant to make? The molds already have a hole and you can directly put a wire or cord through it. Making earrings? Do An metal ring in a hole and hang one here ear hook . Making a necklace? Also see: - Wax cord necklaces - metal rings for jewelry - screw eyes for jewelry - brass lobster clasps - ear hooks for jewelry making Mold dimensions : 4 cm diameter Mold contents : 5 grams Need epoxy? The use of suitable epoxy is important for the end result of your Resin Art art. We have two types of epoxy resins, both of which have advantages and disadvantages. 1 . Do you want to use epoxy that is very easy to process? Then choose our UV Resin . This epoxy is ready to use and hardens within a few minutes using UV light. You let this resin dry in direct sunlight or under a UV lamp. 2 . You can also choose the Epoxy casting resin 1:1 or UltraEpoxy , these epoxy resins are very easy to use and suitable for larger surfaces. Make your Resin Art unique with these pigments You can give your Resin Art a unique twist with special color pigments. Achieve a full opaque color with shimmer, go for transparent pigment or pigment paste. Quickly view all color pigments especially for Resin Art.

    4,95

    Morgen bezorgd

  • Siliconen Mallen Set Windvanger - #itsokay#

    Wind Catcher Making DIY Package

    Do it yourself kit to make a wind catcher. Everything you need to make a wind catcher for indoors or outdoors! With this set you can easily make a beautiful wind catcher that is very resistant to wind and weather. With color pigments for epoxy you can create the most unique colors and effects. Including moulds, wire and other supplies (excluding epoxy resin). Are you going to hang the wind catcher outside in the sun and cast it transparently (i.e. without color)? Then add a UV blocker for epoxy , so that your artwork does not yellow due to sunlight. Made of flexible silicone, so it is easy to use and can be reused multiple times. Cannot be put in the oven or dishwasher. Variant 1 = Round Dimensions: Final product 30-80 cm long and 12 cm wide. Depending on how big you make it. Number of molds: 1 Contents of molds: 50 grams Extra: sturdy fishing line, 3 elongated ornaments of 7,10 and 12 cm, 12 large beads Variant 2 = Sun & Stars Dimensions: Final product 30-80 cm long and 12 cm wide. Depending on how big you make it. Number of molds: 6 Content of molds in total: 90 grams Extra: sturdy fishing line, 15 large and 15 small beads Making an epoxy wind catcher "Round" Pour all required epoxy molds into the mold. The end result of this mold gives all shapes once. You can determine the size of your wind catcher yourself by casting more shapes. 1. Cut 5 equal lengths of fishing line. Insert all 5 of these through the holes of the pink ring, as shown in the example. Insert the wires at the top through a large bead and then tie the 5 wires around the top open ring. 2. Finish the whole thing per thread. In this example, the fishing line has been threaded through everything twice. This way everything can still be moved a bit, but it stays in place. 3. In photo 3 you can see how you first thread the wire twice through the pink ring and then finish the wire. Here we opted for a bead, then an epoxy round, another bead, another round but different size, finishing with a bead. 4. The bottom bead is finished with a button and a drop of UV Epoxy resin to ensure that the button does not sag and the bead does not slip off the fishing line. Making an epoxy windcatcher "Sun & Stars" Fill the molds with epoxy and wait until everything has hardened. Get everything ready and make sure you have pliers to squeeze the small silver balls. 1. Cut 5 wires of equal length and thread them through the blue ring as shown in the example. There are 10 holes, but you only use 5 wires. Gather them above the ring and slide a silver ball around it and squeeze it closed. Make sure you have enough wire left to place another bead above it and attach it to a sun. 2. The orange disc is the base for the iron bars. Place the wire for the iron rods according to the lines with number 1. From above, the wire goes through the disk, then through an iron rod and back through the orange disk. Close this at the top with a silver ball and squeeze it closed. Cut the remaining wire. Do this for all 3. A long wire passes through the middle hole where the ball arrives to ring against the iron bars. The lines of number 2 are the holes through which you add 2 pieces of fishing line to which the orange disc hangs. Close these wires together with the middle wire at the top with a silver ball and make sure there is enough wire left to thread through the bead and sun. 3. Join the whole thing together with the wire from the blue ring and thread all this combined wire through a bead and through the hole in the sun. Close this with a silver ball and squeeze it tightly. In the example 8 wires are used. The top is secured with a silver ball on top of the blue ring, after which the thread is worked downwards. Use a bead with a silver ball underneath. In the example, the wire has been threaded through the silver ball twice, otherwise it would not clamp well enough. The beads are hung at different heights with a silver ball underneath each and the bottom epoxy stars and moons are also closed with a silver ball. 4. Once the wind catcher is assembled, hang the last sun on the middle wire of the orange ring where the large bead is attached to make the iron rods ring. Hang the last sun at the bottom at a nice height and close it again with a silver ball and pinch it closed. The wind catcher is now ready for use. Need epoxy? The use of suitable epoxy is important for the end result of your Resin Art art. We recommend using Epoxy casting resin 1:1 or UltraEpoxy for these types of molds. These epoxy resins are very easy to use and suitable for larger surfaces. Make your Resin Art unique with these pigments You can give your Resin Art a unique twist with special color pigments. Achieve a full opaque color with shimmer, go for transparent pigment or pigment paste. Quickly view all color pigments especially for Resin Art.

    10,95

    Morgen bezorgd
  • Last stock! Siliconen Mallen Set Dromenvanger - Dromenvanger maken - #itsokay#

    Silicone Molds Set Dreamcatcher - Making a dreamcatcher

    This mold set contains everything you need to make a dream catcher for outdoors or indoors! With this mold you can easily make a beautiful dream catcher that is very resistant to wind and weather. With color pigment for epoxy you can create the most colors and effects. Excluding wire and beads. Made of flexible silicone, so it is easy to use and can be reused multiple times. Cannot be put in the oven or dishwasher. Assembled product dimensions: 52.5 cm long x 19.5 cm wide Mold contents: 250 grams of epoxy resin Recommended epoxy Do you want high-quality epoxy available in cheap bulk packages? Then choose the UltraEpoxy . You mix this resin 100:60 and it hardens within 24 hours. Choose the Epoxy resin 1:1 if you want a very easy resin: it is relatively more expensive than the UltraEpoxy. You mix this resin 100:100 and it hardens within 24 hours. Make your Resin Art unique with these pigments You can give your Resin Art a unique twist with special color pigments. Are you going for a nice opaque color or are you going for a transparent color? See our color pigments especially for Resin Art.

    16,95

    Morgen bezorgd

  • Siliconen Chakra Mal met 14 symbolen 39mm (2 mallen) - #itsokay#

    Silicone Chakra Mold with 14 symbols 39mm (2 moulds)

    2 Silicone molds for making symbols of the chakras. Add real gemstones , copper, metal sawdust etc and make healing pendants or decorations. Heal your chakra yourself with homemade creations. Made of flexible silicone, so it is easy to use and can be reused multiple times. Tip! You can color the center of the mold (the symbols) with a posca paint marker Dimensions of mold 14 symbols : 31 cm long x 4.6 cm wide and 1.1 cm deep Dimensions of mold 8 symbols : 31 cm long x 4.6 cm wide and 1.1 cm deep Mold contents : 25 grams per mould Need epoxy? The use of suitable epoxy is important for the end result of your Resin Art art. We recommend using Epoxy casting resin 1:1 or UltraEpoxy for these types of molds. These epoxy resins are very easy to use and suitable for larger surfaces. Make your Resin Art unique with these pigments You can give your Resin Art a unique twist with special color pigments. Achieve a full opaque color with shimmer, go for transparent pigment or pigment paste. Quickly view all color pigments especially for Resin Art.

    7,95

    Morgen bezorgd
  • Sale -10% Epoxy Casting Resin UV - (UltraEpoxy Premium)

    Epoxy Casting Resin UV - (UltraEpoxy Premium)

    UltraEpoxy. Premium UV Epoxy casting resin of very high quality at a competitive price. Suitable for large and small surfaces such as art: jewelry, coasters, orgonites and more. Also very suitable for coatings: table tops, photo panels, kitchen tops, bar tables, paintings and more. This 'artificial epoxy' offers you the best quality. Has the least bubble, extreme clarity and good UV resistance . Easy to use for beginners and popular among experienced hobbyists. Advantages UltraEpoxy offers you the best quality To pour up to 1-3 centimeters thick Has the least bubbles and is extremely clear High UV resistance Food safe Adheres to almost any clean, dry surface (wood, concrete, plastic) Can be colored with 1-5% pigment of your choice Mixing ratio: 100:60 (100 grams of resin, 60 grams of hardener) Cured within +/- 24 hours (fully cured after 48-72 hours) and suitable for larger and smaller surfaces Supplied with information flyer about the working method Preparation Epoxy adheres poorly to a dirty or greasy surface. Therefore, always clean the surface or mold thoroughly beforehand. For example, use acetone or another degreaser. Are you going to cast in a silicone mold? Then clean the mold after each casting with a mild soapy solution, such as dishwashing liquid and warm water. Never use steel wool or scouring pads, as these can damage the silicone mold. Carefully remove your creation from the mold, otherwise the mold may be damaged. Casting resin for beginners and experienced artists The UltraEpoxy has been specially developed for experienced hobbyists, artists but also for beginners. By using high-quality and more expensive ingredients, this epoxy almost always cures beautifully. Even if you do not maintain the mixing ratio properly or if you pour under conditions that are too cold or warm. It is also widely applicable. Applying a beautiful coating to your table, casting a large silicone mold or making a small piece of jewelry, it's all possible with the UltraEpoxy. High UV resistance UltraEpoxy is one of the clearest epoxies and has very good UV resistance under normal conditions. With many cheap, but also more expensive epoxy, you run the risk of your creation yellowing because cheap ingredients are used. Are you going to cast transparently or will your artwork come into contact with direct sunlight? Always add a little UV blocker to the epoxy mixture. This so that you can be sure that your work of art or jewelry remains beautiful and does not yellow. Working with the UltraEpoxy Working with the UltraEpoxy is very simple: Epoxy consists of 2 components: the resin and a hardener. Weigh how much you need (see mixing chart below / your flyer when ordering). For example, weigh 100 grams of resin and 60 grams of hardener and combine them in one (silicone) mixing cup . Add pigment colors for epoxy if necessary. Make sure you mix the resin and hardener very well for 3 minutes; scrape the bottom and down the sides. Never add too much hardener to the resin. With epoxy it is important to maintain the mixing ratio correctly! Otherwise, the epoxy may remain soft or sticky. Cured epoxy is safe for both humans and animals. * This product consists of two components. So you have to mix it and let it harden. This product does not work with a UV lamp. Mixing schedule This diagram is also included in the box with your order. Do you find calculating the correct mixing ratio difficult or do you simply find it useful to have a diagram at hand? In the diagram below you can read exactly how much base (A) and hardener (B) you need per gram to mix epoxy correctly. A few grams more or less is no problem with this premium epoxy! Characteristics Mixing ratio: 100:60 (100 grams of resin, 60 grams of hardener) Processing time: 30-60 minutes (15-21°C) Dust dry: after 1-4 hours (20°C) Handleable: after 12 (20°C) Cured: after +/- 24 hours, full hardening: at least 2 days (48-72 hours) Heat resistance: 40-45 °C Pour thickness: 1-3 CM Food safe: Yes (for fruit bowl e.g.) Food safe: No (for cutting board e.g.) The use of epoxy casting resin Epoxy casting resin is a versatile material used for a wide range of applications. Consider, for example, resin art, coatings and casting objects. By mixing liquid resin with a hardener, you can make the most beautiful creations while epoxy resining. The liquid hardener and epoxy will harden slowly, creating a strong and durable layer for your designs. In addition, most epoxy resins are suitable for different surfaces. This includes concrete, an absorbent surface, plastic and wood. At ItsOkay we have a wide range of epoxy resins, so you will always find the right epoxy for your projects. It doesn't matter whether you want to coat or pour, it's all possible with our epoxy. What exactly is UV resistant epoxy casting resin? UV resistant epoxy casting resin is a type of epoxy formulated to resist the harmful effects of UV rays from the sun. Standard epoxy casting resins can discolour or degrade over time if exposed to too much sunlight. UV epoxy casting resin is specially designed to minimize negative effects of sunlight on your epoxy casting resin. This means that UV-resistant epoxy casting resin retains its clarity, color and durability for longer. This makes this epoxy casting resin suitable for outdoor creations. Epoxy tables for outside and inside Epoxy resin table tops can be a beautiful addition to the design of your home or garden. When creating outdoor table tops, large castings are used. This makes it important that you already have experience with creating epoxy cast resin works of art. For beginners, large castings can be a complex start. Are you a real epoxy casting resin do-it-yourselfer? Then you can give your outdoor space a unique touch with your creation. Do you have questions? Feel free to email our experts, we are happy to help. Because UV epoxy casting resin is more resistant to sunlight, you can create beautiful effects for outdoors. Liquid epoxy resin Liquid casting resin is a versatile product. This type of epoxy resin can be used for various surfaces and creations. Liquid epoxy casting resin is therefore perfectly suitable for creating works of art, casting table tops, laminating wood, repairing surfaces and much more. Liquid epoxy casting resin also offers excellent adhesion to various types of surfaces. This includes wood, metal and most plastics. This makes epoxy casting resin ideal for various applications. Epoxy casting resin with a simple mixing ratio If you are new to creating epoxy art, it can be difficult to choose from different types of epoxy. This Epoxy Casting Resin UV - (UltraEpoxy Premium) is an excellent choice if you are looking for a high quality universal epoxy casting resin. This epoxy is suitable for any surface. Our epoxy casting resin also has a simple mixing ratio of 100:60 and is supplied with a handy information flyer. This epoxy is therefore easy to use, especially for the novice artist. How safe is epoxy casting resin? Our epoxy casting resins have been extensively tested. However, it never hurts to use personal protection or protection for the table you work on. For example, if you are going to make epoxy cast resin creations at the kitchen table, you don't want to make a mess. Especially after complete curing, spilled epoxy casting resin is difficult to remove. Therefore, use newspapers or a durable silicone placemat for optimal protection. Even though our epoxy casting resin has been carefully tested, good protection is not an unnecessary luxury. Consider nitrile gloves if necessary and make sure you work in a well-ventilated area (window open). Fumes can be released when pouring epoxy resin. This concerns very small quantities, which makes epoxy casting resin certainly safe to use. Colored epoxy casting resin Our UV epoxy casting resin is extremely clear and transparent in color. With pigment you can mix epoxy and colors together, making it easy to put together the right colors. Discover our wide range of color pigments for epoxy. Moreover, you can also choose RAL colours. Ral colors are color codes developed by the German Reichsschauss für Lieferbedingungen und Gütesicherung institute. UV blocker epoxy casting resins For the very best results in transparent applications, you can add a UV blocker to epoxy casting resin. The UltraEpoxy is well protected against UV light, but when pouring transparently we always recommend adding a UV blocker. A UV blocker prevents long-term yellowing caused by UV rays. Epoxy casting resin for coating your creations This epoxy is also suitable for coating. The UltraEpoxy is a high quality versatile transparent epoxy. For example, you can use this epoxy to finish tables, tiles, kitchen tops and much more. This transparent epoxy has good adhesion to almost all surfaces, making it ideal for coatings. How much epoxy casting resin should you use? How much epoxy you need depends on the size of your project and the application. To apply a coating you need approximately 250 grams per m2 per layer, on wood it is usual to apply 2-3 layers. To pour epoxy into a mold, use approximately 1 kilo of epoxy per millimeter of layer thickness per m2. The product pages for silicone molds from itsOkay state exactly how much epoxy you need for the mold you want to order. You can use standard formulas for shapes such as squares, bars, rectangles and circles. Calculating volume of rectangles and squares: length in cm x width in cm x layer thickness in cm x 1.1 (specific weight): 1000 = number of kilograms of epoxy resin. Calculate volume of circles: 3.14 (pi) x radius in cm (half diameter) x radius in cm x layer thickness in cm x 1.1 = number of kilograms of epoxy. Buy epoxy Epoxy can be used for many purposes. This makes epoxy suitable for all kinds of creations. It is important that you always choose the right product. Don't know which epoxy casting resin is suitable for your creation? Then you can always take a look at our knowledge center or consult our experts. Do you have any questions? On our website you will find a wide range of epoxy products, including epoxy resin and supplies. Do you have questions about our accessories or epoxy resin? Then you can always contact our specialists without obligation. Our specialists are happy to help you with the right products for your casting and coating projects.

    15,5013,95

    Morgen bezorgd
  • Sale -12% Epoxy Casting Resin UV - (1:1 Casting Resin)

    Epoxy Casting Resin UV - (1:1 Casting Resin)

    Epoxy casting resin 1:1. UV Epoxy casting resin for crafts / hobbies. Making jewelry, coasters, orgonite and more. Suitable for large and small surfaces such as jewelry, coasters, orgonite and more. Also suitable for table tops, photo panels, kitchen tops, bar tables, paintings and more. This 'artificial epoxy' is of high quality. Easy mixing ratio of 1:1 (the only 1:1 brand) and therefore very popular among many hobbyists. Has few bubbles , is very clear and has good UV resistance . Advantages of pouring epoxy 1:1 The ratio is nice and easy: 1 to 1 To pour up to 1-3 centimeters thick Very clear and few bubbles Good UV resistance Adheres to almost any clean, dry surface (wood, concrete, plastic) Can be colored with a maximum of 1-5% pigment of your choice Cured within 24 hours and suitable for larger and smaller surfaces Preparation Epoxy adheres poorly to a dirty or greasy surface. Therefore, always clean the surface or mold thoroughly beforehand. For example, use acetone or another degreaser. Are you going to cast in a silicone mold? Then clean the mold after each casting with a mild soapy solution, such as dishwashing liquid and warm water. Never use steel wool or scouring pads, as these can damage the silicone mold. Carefully remove your creation from the mold, otherwise the mold may be damaged. High UV resistance This epoxy has good UV resistance under normal conditions. With many cheap, but also more expensive epoxy, you run the risk of your creation yellowing because cheap ingredients are used. Are you going to cast transparently or will your artwork come into contact with direct sunlight? Always add a little UV blocker to the epoxy mixture. This so that you can be sure that your work of art or jewelry remains beautiful and does not yellow. Working with the Epoxy resin 1:1 Working with this epoxy resin is the easiest , because you work with a 1:1 mixing ratio: 1. Epoxy consists of 2 components: the resin (a) and a hardener (b). 2. Weigh how much you need. For example, weigh 10 grams of resin and 10 grams of hardener and combine this in one (silicone) mixing cup to make 20 grams of epoxy in total. If necessary, add color pigment for epoxy resin. 3. Make sure you mix the resin and hardener very well for 3 minutes; scrape the bottom and down the sides. 4 . Never add too much hardener to the resin. With epoxy it is important to maintain the mixing ratio correctly! Otherwise, the epoxy may remain soft or sticky. Cured epoxy is safe for both humans and animals. * This product consists of two components. So you have to mix it and let it harden. This product does not work with a UV lamp. Properties of pouring epoxy 250 gram packaging: 125 gram bottle of resin and 125 gram hardener etc 500 gram packaging: 250 gram bottle of resin and 250 gram hardener etc Mixing ratio: 1:1 (1 gram resin, 1 gram hardener) Processing time: 30-60 minutes (15-21°C) Dust dry: after 1-4 hours (20°C) Can be handled: after 12 hours (20°C) Full hardening: 2 days Heat resistance: 40-45 °C Pour thickness: 1-3 CM Food safe: No Liquid epoxy resin When you want to start with epoxy resin, it is important that you choose high-quality pouring epoxy. A good quality pouring epoxy will almost always cure well and beautifully. Maintaining the correct mixing ratio is also very important when pouring epoxy resin. An incorrect ratio can cause, for example, incomplete curing. Our epoxy resin has a mixing ratio of 1:1. This is the simplest mixing ratio. Super easy and you can't go wrong! Choose the right epoxy molds Are you looking for a specific shape? No problem. We then have 300+ silicone molds in stock in our range. Through our website you can only purchase high-quality silicone molds, which are specially made for casting epoxy resin works of art. Silicone molds are ideal because you can easily remove the epoxy casting resin from the mold after curing. In addition, these molds are sustainable in use, because they can often be reused. Widely applicable epoxy casting resin This clear epoxy casting resin is ideal for use for various purposes. How about an epoxy serving board or your own jewelry. Our epoxy resins are also ideal for larger projects. Did you know, for example, that this epoxy is also often chosen for an epoxy coating of figurines and furniture? This epoxy casting resin is therefore a very versatile product. Curing time of your resin art project When you start working with Resin Art, you must take the curing time into account. On a sunny day, curing is a lot faster than on a cloudy or cold day. Epoxy is best processed at a temperature of approximately 21°C. When it is colder, the processing time will be longer and the curing will take longer. When it is warmer the opposite applies. This epoxy casting resin has a processing time of approximately 60 minutes and it hardens within approximately 24 hours. If you process this epoxy at a temperature of, for example, 15°C, curing can take up to 30 hours. Different colors and decorations This epoxy casting resin is very clear and transparent in color. You can therefore pour this epoxy transparently. Of course you can create cool effects by adding color pigment . Quickly discover our wide range of color pigments and choose your favorite color. You can not only create color by using pigments, but also with glitter, for example. By adding glitter to your transparent epoxy casting, you can make your creations truly unique. Using epoxy for laminating Epoxy is also ideal for laminating certain products. Laminating is actually applying a coating. This allows you to protect and strengthen your products and surfaces. It is therefore widely used for wood, fiberglass and carbon fiber. Is epoxy resin safe to use? We are often asked by beginners whether epoxy casting resin is safe to use. Epoxy casting resin is certainly safe to use, but we always recommend taking precautions. Fumes can be released during the curing and mixing of epoxy. If you work with cheap epoxy resins or those that come from abroad, you have a greater risk of this. Our epoxy meets all safety requirements. You won't have any trouble with this. This epoxy casting resin is safe to use. Buy pour epoxy resin If you want to get started with epoxy casting resin, then you have come to the right place at epoxy expert itsOkay. You can contact us for universal epoxy resin and all other supplies. Our epoxy resin is of the highest quality. This makes our epoxy resins ideal for coating or for creating all kinds of works of art. Do you want to buy epoxy, but do you still have questions? Then you can always contact our customer service without obligation. Our team of specialists is happy to help you answer all your questions.

    16,9514,95

    Morgen bezorgd
  • Siliconen Mal Pentagram Ketting - #itsokay#

    Silicone Mold Pentagram Pendant / Symbol

    Silicone mold for making a pentagram The five points represent the four elements and the top point points to 'the higher'. The circle around it connects everything again. There is already a hole in this mold. After casting you can put a chain or cord through this hole. It is a very fine mold. Pour epoxy into the mold and add food coloring, dried flowers , gold foil or other decorations that you like. This mold is made of high quality silicone. The mold is not suitable for the oven or microwave.  Made of flexible silicone, so it is easy to use and can be reused multiple times. Making a necklace? Also see: - Ready-made necklaces - metal rings - screw eyes - brass lobster clasps - ear hooks Mold dimensions : diameter = 4 cm Mold contents : 5 grams Need epoxy? The use of suitable epoxy is important for the end result of your Resin Art art. We have two types of epoxy resins, both of which have advantages and disadvantages. 1 . Do you want to use epoxy that is very easy to process? Then choose our UV Resin . This epoxy is ready to use and hardens within a few minutes using UV light. You let this resin dry in direct sunlight or under a UV lamp. 2 . You can also choose the Epoxy casting resin 1:1 or UltraEpoxy , these epoxy resins are very easy to use and suitable for larger surfaces. Make your Resin Art unique with these pigments You can give your Resin Art a unique twist with special color pigments. Achieve a full opaque color with shimmer, go for transparent pigment or pigment paste. Quickly view all color pigments especially for Resin Art.

    3,95

    Morgen bezorgd
  • Last stock! Siliconen Mal Wierook houder | Wierookbrander - #itsokay#

    Silicone Mold Incense Holder | Incense burner

    Make your own unique incense holder / incense burner with these large sturdy silicone molds. Three different silicone molds in one. Choose your favorite and make a beautiful incense holder. Made of stronger, high quality silicone material. The mold is therefore often reusable. Not suitable for the oven or dishwasher. Tip! You can color the symbols/shapes with a posca paint marker Finished product dimensions: 25 cm x 3.5 cm Mold contents: 50 grams per mould Need epoxy? The use of suitable epoxy is important for the end result of your Resin Art art. We recommend using Epoxy casting resin 1:1 or UltraEpoxy for these types of molds. These epoxy resins are very easy to use and suitable for larger surfaces. Make your Resin Art unique with these pigments You can give your Resin Art a unique twist with special color pigments. Achieve a full opaque color with shimmer, go for transparent pigment or pigment paste. Quickly view all color pigments especially for Resin Art.

    12,95

    Morgen bezorgd

  • Siliconen Mal 3 Waxinelichtjes - #itsokay#

    Silicone Mold 3 Tea Lights

    Silicone mold to make a tea light holder with 3 holes. This mold is made of high quality silicone, which makes the mold very flexible. The mold can be reusable several times. Not suitable for the oven or dishwasher. Carefully remove a creation from the mold (possibly with soap), otherwise you may damage it. Suitable for normal tea lights. A tea light or tea light has a diameter of just under 4 centimeters. Mold dimensions: 20 cm long x 8 cm wide Suitable for: normal size tea lights Mold contents: approximately 100 grams Filling material: Suitable for epoxy, plaster and jesmonite Make a tea light holder Making a tea light holder or tea light holder to your taste is not difficult at all. With the use of a silicone mold and filling material such as epoxy, plaster, or jesmonite, the possibilities are enormous. You can also customize the colors of this DIY project to your own liking. You can make these tealight holders yourself and provide an extra beautiful light effect. For extra coziness in your house or on the terrace. Please note: are you going to fill the mold with epoxy? Epoxy is not heat resistant, even though some brands claim it is. Therefore, always place an electric tea light in an epoxy tea light holder. Equally beautiful and completely safe! Need epoxy? The use of suitable epoxy is important for the end result of your Resin Art art. We recommend using Epoxy casting resin 1:1 or UltraEpoxy for these types of molds. These epoxy resins are very easy to use and suitable for larger surfaces. Make your Resin Art unique with color You can give your Resin Art a unique twist with special color pigments. Achieve a full opaque color with shimmer, go for transparent pigment or pigment paste. Quickly view all color pigments especially for Resin Art.

    7,45

    Morgen bezorgd

  • Siliconen Mal Waxinelichthouder (3 varianten) - #itsokay#

    Silicone Mold Tea Light Holder (3 variants)

    Three types of silicone molds to make a tea light holder holder. Our molds are made of high quality silicone, which makes them very flexible. They are reusable. Not suitable for the oven or dishwasher. Carefully remove a creation from the mold (possibly with soap), otherwise you may damage it. Round mold dimensions: diameter 9 cm Heart-shaped mold dimensions: diameter 10 cm Lotus mold dimensions: diameter 10 cm Mold contents: approximately 75 grams per mould Filling material: Suitable for epoxy, plaster and jesmonite Make a tea light holder Making a tea light holder or tea light holder to your taste is not difficult at all. With the use of a silicone mold and filling material such as epoxy, plaster, or jesmonite, the possibilities are enormous. You can also customize the colors of this DIY project to your own liking. You can make these tealight holders yourself and provide an extra beautiful light effect. For extra coziness in your house or on the terrace. Please note: are you going to fill the mold with epoxy? Epoxy is not heat resistant, even though some brands claim it is. Therefore, always place an electric tea light in an epoxy tea light holder. Equally beautiful and completely safe! Need epoxy? The use of suitable epoxy is important for the end result of your Resin Art art. We recommend using Epoxy casting resin 1:1 or UltraEpoxy for these types of molds. These epoxy resins are very easy to use and suitable for larger surfaces. Make your Resin Art unique with color You can give your Resin Art a unique twist with special color pigments. Achieve a full opaque color with shimmer, go for transparent pigment or pigment paste. Quickly view all color pigments especially for Resin Art.

    7,95

    Morgen bezorgd
  • Sale -59% Siliconen Mal Engelen Vleugel - #itsokay#

    Silicone Mold Angel Wing

    Silicone epoxy mold angel wing (left or right wing). This mold is being discontinued. Gone = gone! Nice silicone mold of angel wings for using epoxy or plaster. Made of flexible silicone, so it is easy to use and can be reused multiple times. Cannot be put in the oven or dishwasher. Mold dimensions: 17 cm high x 11 cm wide and 1 cm thick. Same dimensions left and right wing. Mold contents: 75 grams per mould Need epoxy? The use of suitable epoxy is important for the end result of your Resin Art art. We recommend using Epoxy casting resin 1:1 or UltraEpoxy for these types of molds. These epoxy resins are very easy to use and suitable for larger surfaces. Make your Resin Art unique with these pigments You can give your Resin Art a unique twist with special color pigments. Achieve a full opaque color with shimmer, go for transparent pigment or pigment paste. Quickly view all color pigments especially for Resin Art.

    11,954,95

    Morgen bezorgd
  • Last stock! Siliconen Mal Runes | Rune stenen - #itsokay#

    Silicone Mold Runes | Rune stones

    Two silicone molds with which you can make your own resin art rune stones. Make a set of stones exactly to your taste that you will keep for the rest of your life! Made of flexible silicone, so it is easy to use and can be reused multiple times. Cannot be put in the oven or dishwasher. You can also order the handles separately. Tip! You can color the symbols with a posca paint marker or pre-cast with a pipette and mixed epoxy resin with pigment. Mold dimensions : 17.5.5 cm long x 7.2 cm wide Stone dimensions: 3 cm x 2 cm Mold contents: approx. 10 grams per stone Need epoxy? The use of suitable epoxy is important for the end result of your Resin Art art. We recommend using Epoxy casting resin 1:1 or UltraEpoxy for these types of molds. These epoxy resins are very easy to use and suitable for larger surfaces. Make your Resin Art unique with these pigments You can give your Resin Art a unique twist with special color pigments. Achieve a full opaque color with shimmer, go for transparent pigment or pigment paste. Quickly view all color pigments especially for Resin Art.

    9,95

    Morgen bezorgd

  • Siliconen Mal Levensboom Groot - #itsokay#

    Silicone Mold Tree of Life Large

    Silicone mold large tree of life Simply make a beautiful tree of life yourself and hang it up for decoration or give it a nice place in your home. Pour epoxy resin or plaster into the mold and add food coloring , dried flowers for epoxy , gemstones or other things you like. Made of flexible silicone, so it is easy to use and can be reused multiple times. Cannot be put in the oven or dishwasher. Mold dimensions: diameter 21 cm and 1 cm thick Mold contents: - Need epoxy? The use of suitable epoxy is important for the end result of your Resin Art art. We recommend using Epoxy casting resin 1:1 or UltraEpoxy for these types of molds. These epoxy resins are very easy to use and suitable for larger surfaces. Make your Resin Art unique with these pigments You can give your Resin Art a unique twist with special color pigments. Achieve a full opaque color with shimmer, go for transparent pigment or pigment paste. Quickly view all color pigments especially for Resin Art.

    14,95

    Morgen bezorgd
  • DIY Wandkandelaar Maken Pakket - #itsokay#

    DIY Wall Sconce Making Package

    Silicone mold in 3 variants to make a beautiful wall sconce yourself. Unleash your creativity and design a beautiful wall sconce in no time. By using pigment colors and decorations you can design it completely to your taste. This mold is made of high-quality flexible silicone. This makes the mold easy to use and the mold can be reused several times. The mold cannot be placed in the oven or dishwasher. Mold dimensions: 20 cm long x 10 cm high Mold contents: approximately 190 grams Suitable for: epoxy, plaster, jesmonite How to make a wall sconce? Candles add that extra coziness to your home. Are you looking for nice inspiration to make your own wall candle holder? Then this DIY package is really something for you to get started with! With this silicone mold you can make a beautiful wall sconce in the shape of an Owl, Cat or Hand of Fatima (symbol for personal protection). What do you need to make a wall candle holder yourself? - 1 x Silicone Mold Wall Sconce - Epoxy casting resin - Your favorite decorations or pigments for the epoxy - A number of screws to attach the candlestick to the wall Pour epoxy into the silicone mold and add your favorite decorations. After the epoxy has hardened, you can remove the wall sconce from the mold and hang it up or give it as a gift! Need epoxy? The use of suitable epoxy is important for the end result of your Resin Art art. We recommend using Epoxy casting resin 1:1 or UltraEpoxy for these types of molds. These epoxy resins are very easy to use and suitable for larger surfaces. Make your Resin Art unique with these pigments You can give your Resin Art a unique twist with special color pigments. Achieve a full opaque color with shimmer, go for transparent pigment or pigment paste. Quickly view all color pigments especially for Resin Art.

    9,95

    Morgen bezorgd
  • Last stock! Siliconen Mal Drieogige Kat & Demon (2 st.) - #itsokay#

    Silicone Mold Three-eyed Cat & Demon (2 pcs.)

    Silicone mold fantasy cat head (2 pcs.) Fantasy cat head in the shape of a demon and a three-eyed cat. For making a cool necklace. The three-eyed cat refers to a mythical creature found in many ancient spiritual texts. This being appears as a cat with a third eye between its eyebrows and symbolizes the third eye chakra that we all have. It is a mainstay of dreams and has detailed interpretations relating to consciousness, self-knowledge and spiritual senses. Made of flexible silicone, so it is easy to use and can be reused multiple times. Cannot be put in the oven or dishwasher. Dimensions mold 1: 3.9 x 6.3 cm Dimensions mold 2: 4.5 x 6.4 cm Mold contents: 10 grams per mould Need epoxy? The use of suitable epoxy is important for the end result of your Resin Art art. We recommend using Epoxy casting resin 1:1 or UltraEpoxy for these types of molds. These epoxy resins are very easy to use and suitable for larger surfaces. Make your Resin Art unique with these pigments You can give your Resin Art a unique twist with special color pigments. Achieve a full opaque color with shimmer, go for transparent pigment or pigment paste. Quickly view all color pigments especially for Resin Art.

    4,95

    Morgen bezorgd

  • Last stock! Silicone Mold Moon | Moon

    Silicone Mold Moon | Moon

    Silicone mold for making a moon for decoration/necklace. Two variants of nice silicone molds for making moons. Pour epoxy into the mold and add food coloring, dried flowers , gold foil or other decorations that you like. This mold is made of high quality silicone. The mold is not suitable for the oven or microwave.  Made of flexible silicone, so it is easy to use and can be reused multiple times. Making a necklace? Also see: - Ready-made necklaces - metal rings - screw eyes - brass lobster clasps - ear hooks Dimensions variant 1 : diameter 4 cm x 4 cm long Dimensions variant 2: diameter 4 cm x 6 cm long Mold contents : 5-7 grams Need epoxy? The use of suitable epoxy is important for the end result of your Resin Art art. We have two types of epoxy resins, both of which have advantages and disadvantages. 1 . Do you want to use epoxy that is very easy to process? Then choose our UV Resin . This epoxy is ready to use and hardens within a few minutes using UV light. You let this resin dry in direct sunlight or under a UV lamp. 2 . You can also choose the Epoxy casting resin 1:1 or UltraEpoxy , these epoxy resins are very easy to use and suitable for larger surfaces. Make your Resin Art unique with these pigments You can give your Resin Art a unique twist with special color pigments. Achieve a full opaque color with shimmer, go for transparent pigment or pigment paste. Quickly view all color pigments especially for Resin Art.

    3,95

    Morgen bezorgd
  • Sale -26%Last stock! Siliconen Mal Geboorte / Verjaardag Wolk - #itsokay#

    Silicone Mold Birth Cloud

    Personalize your child's birth or birthday with this beautiful mold. You can easily make a beautiful birth pendant with clouds with this mold. Made of flexible silicone, so it is easy to use and can be reused multiple times. Cannot be put in the oven or dishwasher. You can put his or her name in the large cloud and the details of the birth in the small clouds. Add the text by printing it with our Epoxy Sticker Printer, printing text in "Microsoft Word" or writing with a Posca Paint Marker . Dimensions: the large cloud is +/- 15 cm and the small clouds +/- 4 cm Mold contents: approximately 200 grams Suitable filling material: epoxy, gypsum, jesmonite Need epoxy? The use of suitable epoxy is important for the end result of your Resin Art art. We recommend using Epoxy casting resin 1:1 or UltraEpoxy for these types of molds. These epoxy resins are very easy to use and suitable for larger surfaces. Make your Resin Art unique with these pigments You can give your Resin Art a unique twist with special color pigments. Achieve a full opaque color with shimmer, go for transparent pigment or pigment paste. Quickly view all color pigments especially for Resin Art.

    22,9516,95

    Morgen bezorgd

  • Sale -33% Sieraden Rekje / Standaard Maken - Siliconen Mal - #itsokay#

    Jewelry Rack / Stand Making - Silicone Mold

    Silicone mold and accessories to make a super cute little treasure chest yourself. Are you looking for a place to store jewelry? Give your jewelry a place of honor on this jewelry stand that you can make entirely to your taste. Pour epoxy resin into the mold and add food coloring , glitter for epoxy , dried flowers for epoxy , gemstones or other things you like. Made of flexible silicone, so it is easy to use and can be reused multiple times. Cannot be put in the oven or dishwasher. Finished product dimensions: 22 cm high x 16.5 cm wide. The base is 9 cm in diameter. Package contents: You get two molds. 1 jewelry stand and 1 foot. You can easily mount these on top of each other after both parts have hardened. Mold contents: approximately 100 grams Suitable for: epoxy, plaster, jesmonite Need epoxy? The use of suitable epoxy is important for the end result of your Resin Art art. We recommend using Epoxy casting resin 1:1 or UltraEpoxy for these types of molds. These epoxy resins are very easy to use and suitable for larger surfaces. Make your Resin Art unique with these pigments You can give your Resin Art a unique twist with special color pigments. Achieve a full opaque color with shimmer, go for transparent pigment or pigment paste. Quickly view all color pigments especially for Resin Art.

    11,957,95

    Morgen bezorgd

Login

Forgot your password?

Don't have an account yet?
Create account