Excellent

Epoxy Casting Resin UV - (1:1 Casting Resin)

    Description

    Epoxy casting resin 1:1. UV Epoxy casting resin for crafts / hobbies. Making jewelry, coasters, orgonite and more.

    Suitable for large and small surfaces such as jewelry, coasters, orgonite and more. Also suitable for table tops, photo panels, kitchen tops, bar tables, paintings and more.

    This 'artificial epoxy' is of high quality. Easy mixing ratio of 1:1 (the only 1:1 brand) and therefore very popular among many hobbyists. Has few bubbles , is very clear and has good UV resistance .

    Advantages of pouring epoxy 1:1

    • The ratio is nice and easy: 1 to 1
    • To pour up to 1-3 centimeters thick
    • Very clear and few bubbles
    • Good UV resistance
    • Adheres to almost any clean, dry surface (wood, concrete, plastic)
    • Can be colored with a maximum of 1-5% pigment of your choice
    • Cured within 24 hours and suitable for larger and smaller surfaces

    Preparation

    Epoxy adheres poorly to a dirty or greasy surface. Therefore, always clean the surface or mold thoroughly beforehand. For example, use acetone or another degreaser.
    Are you going to cast in a silicone mold? Then clean the mold after each casting with a mild soapy solution, such as dishwashing liquid and warm water. Never use steel wool or scouring pads, as these can damage the silicone mold. Carefully remove your creation from the mold, otherwise the mold may be damaged.

    High UV resistance

    This epoxy has good UV resistance under normal conditions. With many cheap, but also more expensive epoxy, you run the risk of your creation yellowing because cheap ingredients are used.
    Are you going to cast transparently or will your artwork come into contact with direct sunlight? Always add a little UV blocker to the epoxy mixture. This so that you can be sure that your work of art or jewelry remains beautiful and does not yellow.

    Working with the Epoxy resin 1:1

    Working with this epoxy resin is the easiest , because you work with a 1:1 mixing ratio:

    1. Epoxy consists of 2 components: the resin (a) and a hardener (b).
    2. Weigh how much you need. For example, weigh 10 grams of resin and 10 grams of hardener and combine this in one (silicone) mixing cup to make 20 grams of epoxy in total. If necessary, add color pigment for epoxy resin.
    3. Make sure you mix the resin and hardener very well for 3 minutes; scrape the bottom and down the sides.
    4 . Never add too much hardener to the resin. With epoxy it is important to maintain the mixing ratio correctly! Otherwise, the epoxy may remain soft or sticky. Cured epoxy is safe for both humans and animals.
    * This product consists of two components. So you have to mix it and let it harden. This product does not work with a UV lamp.

    Properties of pouring epoxy

    • 250 gram packaging: 125 gram bottle of resin and 125 gram hardener etc
    • 500 gram packaging: 250 gram bottle of resin and 250 gram hardener etc
    • Mixing ratio: 1:1 (1 gram resin, 1 gram hardener)
    • Processing time: 30-60 minutes (15-21°C)
    • Dust dry: after 1-4 hours (20°C)
    • Can be handled: after 12 hours (20°C)
    • Full hardening: 2 days
    • Heat resistance: 40-45 °C
    • Pour thickness: 1-3 CM
    • Food safe: No

    Liquid epoxy resin

    When you want to start with epoxy resin, it is important that you choose high-quality pouring epoxy. A good quality pouring epoxy will almost always cure well and beautifully.

    Maintaining the correct mixing ratio is also very important when pouring epoxy resin. An incorrect ratio can cause, for example, incomplete curing. Our epoxy resin has a mixing ratio of 1:1. This is the simplest mixing ratio. Super easy and you can't go wrong!

    Choose the right epoxy molds

    Are you looking for a specific shape? No problem. We then have 300+ silicone molds in stock in our range. Through our website you can only purchase high-quality silicone molds, which are specially made for casting epoxy resin works of art.

    Silicone molds are ideal because you can easily remove the epoxy casting resin from the mold after curing. In addition, these molds are sustainable in use, because they can often be reused.

    Widely applicable epoxy casting resin

    This clear epoxy casting resin is ideal for use for various purposes. How about an epoxy serving board or your own jewelry. Our epoxy resins are also ideal for larger projects. Did you know, for example, that this epoxy is also often chosen for an epoxy coating of figurines and furniture? This epoxy casting resin is therefore a very versatile product.

    Curing time of your resin art project

    When you start working with Resin Art, you must take the curing time into account. On a sunny day, curing is a lot faster than on a cloudy or cold day.
    Epoxy is best processed at a temperature of approximately 21°C. When it is colder, the processing time will be longer and the curing will take longer. When it is warmer the opposite applies. This epoxy casting resin has a processing time of approximately 60 minutes and it hardens within approximately 24 hours. If you process this epoxy at a temperature of, for example, 15°C, curing can take up to 30 hours.

    Different colors and decorations

    This epoxy casting resin is very clear and transparent in color. You can therefore pour this epoxy transparently. Of course you can create cool effects by adding color pigment . Quickly discover our wide range of color pigments and choose your favorite color.

    You can not only create color by using pigments, but also with glitter, for example. By adding glitter to your transparent epoxy casting, you can make your creations truly unique.

    Using epoxy for laminating

    Epoxy is also ideal for laminating certain products. Laminating is actually applying a coating. This allows you to protect and strengthen your products and surfaces. It is therefore widely used for wood, fiberglass and carbon fiber.

    Is epoxy resin safe to use?

    We are often asked by beginners whether epoxy casting resin is safe to use. Epoxy casting resin is certainly safe to use, but we always recommend taking precautions. Fumes can be released during the curing and mixing of epoxy. If you work with cheap epoxy resins or those that come from abroad, you have a greater risk of this. Our epoxy meets all safety requirements. You won't have any trouble with this. This epoxy casting resin is safe to use.

    Buy pour epoxy resin

    If you want to get started with epoxy casting resin, then you have come to the right place at epoxy expert itsOkay. You can contact us for universal epoxy resin and all other supplies.

    Our epoxy resin is of the highest quality. This makes our epoxy resins ideal for coating or for creating all kinds of works of art.

    Do you want to buy epoxy, but do you still have questions? Then you can always contact our customer service without obligation. Our team of specialists is happy to help you answer all your questions.

    Epoxy Casting Resin UV - (1:1 Casting Resin)

      Product form

      14,95

      Ordered before 11:30 PM (Mon-Sun), delivered tomorrow

        Description

        Epoxy casting resin 1:1. UV Epoxy casting resin for crafts / hobbies. Making jewelry, coasters, orgonite and more.

        Suitable for large and small surfaces such as jewelry, coasters, orgonite and more. Also suitable for table tops, photo panels, kitchen tops, bar tables, paintings and more.

        This 'artificial epoxy' is of high quality. Easy mixing ratio of 1:1 (the only 1:1 brand) and therefore very popular among many hobbyists. Has few bubbles , is very clear and has good UV resistance .

        Advantages of pouring epoxy 1:1

        • The ratio is nice and easy: 1 to 1
        • To pour up to 1-3 centimeters thick
        • Very clear and few bubbles
        • Good UV resistance
        • Adheres to almost any clean, dry surface (wood, concrete, plastic)
        • Can be colored with a maximum of 1-5% pigment of your choice
        • Cured within 24 hours and suitable for larger and smaller surfaces

        Preparation

        Epoxy adheres poorly to a dirty or greasy surface. Therefore, always clean the surface or mold thoroughly beforehand. For example, use acetone or another degreaser.
        Are you going to cast in a silicone mold? Then clean the mold after each casting with a mild soapy solution, such as dishwashing liquid and warm water. Never use steel wool or scouring pads, as these can damage the silicone mold. Carefully remove your creation from the mold, otherwise the mold may be damaged.

        High UV resistance

        This epoxy has good UV resistance under normal conditions. With many cheap, but also more expensive epoxy, you run the risk of your creation yellowing because cheap ingredients are used.
        Are you going to cast transparently or will your artwork come into contact with direct sunlight? Always add a little UV blocker to the epoxy mixture. This so that you can be sure that your work of art or jewelry remains beautiful and does not yellow.

        Working with the Epoxy resin 1:1

        Working with this epoxy resin is the easiest , because you work with a 1:1 mixing ratio:

        1. Epoxy consists of 2 components: the resin (a) and a hardener (b).
        2. Weigh how much you need. For example, weigh 10 grams of resin and 10 grams of hardener and combine this in one (silicone) mixing cup to make 20 grams of epoxy in total. If necessary, add color pigment for epoxy resin.
        3. Make sure you mix the resin and hardener very well for 3 minutes; scrape the bottom and down the sides.
        4 . Never add too much hardener to the resin. With epoxy it is important to maintain the mixing ratio correctly! Otherwise, the epoxy may remain soft or sticky. Cured epoxy is safe for both humans and animals.
        * This product consists of two components. So you have to mix it and let it harden. This product does not work with a UV lamp.

        Properties of pouring epoxy

        • 250 gram packaging: 125 gram bottle of resin and 125 gram hardener etc
        • 500 gram packaging: 250 gram bottle of resin and 250 gram hardener etc
        • Mixing ratio: 1:1 (1 gram resin, 1 gram hardener)
        • Processing time: 30-60 minutes (15-21°C)
        • Dust dry: after 1-4 hours (20°C)
        • Can be handled: after 12 hours (20°C)
        • Full hardening: 2 days
        • Heat resistance: 40-45 °C
        • Pour thickness: 1-3 CM
        • Food safe: No

        Liquid epoxy resin

        When you want to start with epoxy resin, it is important that you choose high-quality pouring epoxy. A good quality pouring epoxy will almost always cure well and beautifully.

        Maintaining the correct mixing ratio is also very important when pouring epoxy resin. An incorrect ratio can cause, for example, incomplete curing. Our epoxy resin has a mixing ratio of 1:1. This is the simplest mixing ratio. Super easy and you can't go wrong!

        Choose the right epoxy molds

        Are you looking for a specific shape? No problem. We then have 300+ silicone molds in stock in our range. Through our website you can only purchase high-quality silicone molds, which are specially made for casting epoxy resin works of art.

        Silicone molds are ideal because you can easily remove the epoxy casting resin from the mold after curing. In addition, these molds are sustainable in use, because they can often be reused.

        Widely applicable epoxy casting resin

        This clear epoxy casting resin is ideal for use for various purposes. How about an epoxy serving board or your own jewelry. Our epoxy resins are also ideal for larger projects. Did you know, for example, that this epoxy is also often chosen for an epoxy coating of figurines and furniture? This epoxy casting resin is therefore a very versatile product.

        Curing time of your resin art project

        When you start working with Resin Art, you must take the curing time into account. On a sunny day, curing is a lot faster than on a cloudy or cold day.
        Epoxy is best processed at a temperature of approximately 21°C. When it is colder, the processing time will be longer and the curing will take longer. When it is warmer the opposite applies. This epoxy casting resin has a processing time of approximately 60 minutes and it hardens within approximately 24 hours. If you process this epoxy at a temperature of, for example, 15°C, curing can take up to 30 hours.

        Different colors and decorations

        This epoxy casting resin is very clear and transparent in color. You can therefore pour this epoxy transparently. Of course you can create cool effects by adding color pigment . Quickly discover our wide range of color pigments and choose your favorite color.

        You can not only create color by using pigments, but also with glitter, for example. By adding glitter to your transparent epoxy casting, you can make your creations truly unique.

        Using epoxy for laminating

        Epoxy is also ideal for laminating certain products. Laminating is actually applying a coating. This allows you to protect and strengthen your products and surfaces. It is therefore widely used for wood, fiberglass and carbon fiber.

        Is epoxy resin safe to use?

        We are often asked by beginners whether epoxy casting resin is safe to use. Epoxy casting resin is certainly safe to use, but we always recommend taking precautions. Fumes can be released during the curing and mixing of epoxy. If you work with cheap epoxy resins or those that come from abroad, you have a greater risk of this. Our epoxy meets all safety requirements. You won't have any trouble with this. This epoxy casting resin is safe to use.

        Buy pour epoxy resin

        If you want to get started with epoxy casting resin, then you have come to the right place at epoxy expert itsOkay. You can contact us for universal epoxy resin and all other supplies.

        Our epoxy resin is of the highest quality. This makes our epoxy resins ideal for coating or for creating all kinds of works of art.

        Do you want to buy epoxy, but do you still have questions? Then you can always contact our customer service without obligation. Our team of specialists is happy to help you answer all your questions.

        Recently visited articles

          Login

          Forgot your password?

          Don't have an account yet?
          Create account